| Age | Commit message (Collapse) | Author |
|---|
|
This test checks the code-paths for camera's hotplugged and
unplugged support. It is based on bind/unbind of a UVC device
from sysfs. Hence, this test requires root permissions to run
and should have at least one already bound UVC device present
in the system.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Hook up various QCam UI bits with hotplug support introduced
in previous commits. This looks good-enough as first steps
to see how the hotplugging functionality is turning out to be
from application point-of-view.
One can still think of few edge case nuances not yet covered
under this implementation especially around having only one
camera in the system and hotplugging/hot-unplugging it.
Hence, those are intentionally kept out of scope for now. It
might require some thinking on how to handle it on application
level having additional time on hand.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Emit 'cameraAdded' and 'cameraRemoved' from CameraManager to enable
hotplug and hot-unplug support in application like QCam.
To avoid use-after-free race between the CameraManager and the
application, emit the 'cameraRemoved' with the shared_ptr version
of <Camera *>. This requires to change the function signature of
CameraManager::removeCamera() API.
Also, until now, CameraManager::Private::addCamera() transfers the
entire ownership of camera shared_ptr to CameraManager using
std::move(). This patch changes the signature of Private::addCamera to
accept pass-by-value camera parameter. It is done to make it clear from
the caller point of view that the pointer within the caller will still
be valid after this function returns. With this change in, we can emit
the camera pointer via 'cameraAdded' signal without hitting a segfault.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Emit a signal whenever new MediaDevices are added to the
DeviceEnumerator. This will allow CameraManager to be notified
about the new devices and it can re-emumerate all the devices
currently present on the system.
Device enumeration by the CameraManger is an expensive operation hence,
we want one signal emission per 'x' milliseconds to notify multiple
devices additions as a single batch, by the DeviceEnumerator.
Add a \todo to investigate the support for that.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This commit introduces no functional changes.
Split pipelines creation code into a separate function,
so that the function can be re-used for upcoming hotplug
functionality in subsequent commits.
Also, fixup correct tag for \todo.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The pipes_ vector was initially used to store pipeline handlers
instances with the CameraManager when it cannot be referenced from
anywhere else. It was used to retrieve cameras and deleting pipeline
handlers when stopping the camera manager.
In f3695e9b09ce ("libcamera: camera_manager: Register cameras with the
camera manager"), cameras started to get registered directly with camera
manager and in 5b02e03199b7 ("libcamera: camera: Associate cameras with
their pipeline handler") pipeline handlers started to get stored in a
std::shared_ptr<> with each camera starting to hold a strong reference
to its associated pipeline-handler. At this point, both the camera
manager and the camera held a strong reference to the pipeline handler.
Since the additional reference held by the camera manager gets released
only on cleanup(), this lurking reference held on pipeline handler did
not allow it to get destroyed even when cameras instances have been
destroyed. This situation of having a pipeline handler instance around
without having a camera may lead to problems (one of them explained
below) especially when the camera manager is still running.
It was noticed that, there was a dangling driver directory issue (tested
for UVC camera - in /sys/bus/usb/drivers/uvcvideo) on 'unbind' → 'bind'
operation while the CameraManager is running. The directories were still
kept around even after 'unbind' because of the lurking reference of
pipeline handler holding onto them. That reference would clear if and
only if the CameraManager is stopped and then only directories were
getting removed in the above stated path.
Rather than writing a fix to release the pipeline handlers' reference
from camera manager on camera disconnection, it is decided to eliminate
the pipes_ vector from CameraManager moving forwards. There is no
point in holding a reference to it from camera manager's point-of-view
at this stage. It also helps us to fix the issue as explained above.
Now that the pipeline handler instances are referenced via cameras only,
it can happen that the destruction of last the camera instance may
result in destruction of the pipeline handler itself. Such a possibility
exists in PipelineHandler::disconnect(), where the pipeline handler
itself can get destroyed while removing the camera. This is acceptable
as long as we make sure that there is no access of pipeline handler's
members later on in the code path. Address this situation and also add a
detailed comment about it.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the EXIF directory is empty due to no metadata being available tools
such as tiffinfo complains that the directory is malformed.
TIFFFetchDirectory: Sanity check on directory count failed, this is probably not a valid IFD offset.
TIFFReadCustomDirectory: Failed to read custom directory at offset 0.
Always record the creation time in the EXIF directory instead of adding
complexity to skip creating the EXIF directory if there is no metadata
to record. This ensures there are at least some entries in the EXIF
directory and that makes tiffinfo happy.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The TCL_SUBST tag is deprecated and causes doxygen 1.18.8 to generate a
warning. Drop it from Doxyfile.in.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add kernel version detection to warn user
that only >= 5.0.0 V4L API are supported in
libcamera.
Signed-off-by: Stéphane Cerveau <scerveau@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Modify toString() to print mbus format name instead of its hex code as
the name is easier to understand.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for the Bayer formats produced on the IPU3. The format uses
a memory layout that is hard to repack and keep the 10-bit sample size,
therefore scale the samples to 16-bit when creating the scanlines.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As the ELF parsing code uses non-const pointers to the ELF mapping, we
have to map the module in private read-write mode. This causes issues
with valgrind, due to the IPA manager mapping the module in shared
read-only mode and valgrind having trouble loading debugging symbols
later at dlopen time due to conflicting mappings.
This is likely a bug in valgrind (reported as [1]), but we can easily
work around it by using shared read-only mappings only. As such a
mapping shouldn't be less efficient than private read-write mappings,
switch the mapping type. This requires modifying the ELF parsing
functions to operate on const memory, which is a good idea anyway as
they're not supposed to modify the ELF file.
[1] https://bugs.kde.org/show_bug.cgi?id=422601
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The logic of the code guarantees that the PipelineHandler pointer passed
to the RkISP1Frames constructor is an instance of PipelineHandlerRkISP1.
We can thus use static_cast<> instead of dynamic_cast<>.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Until N4387 (https://wg21.link/N4387, applied as a defect report for
C++11), a function could not return a tuple using
copy-list-initialization. This affects gcc-5 that was released before
N4387 was integrated, and causes a compilation error:
../../src/android/camera_device.cpp: In member function ‘std::tuple<unsigned int, unsigned int> CameraDevice::calculateStaticMetadataSize()’:
../../src/android/camera_device.cpp:391:32: error: converting to ‘std::tuple<unsigned int, unsigned int>’ from initializer list would use explicit constructor ‘constexpr std::tuple<_T1, _T2>::tuple(_U1&&, _U2&&) [with _U1 = unsigned int&; _U2 = unsigned int&; <template-parameter-2-3> = void; _T1 = unsigned int; _T2 = unsigned int]’
return { numEntries, byteSize };
Fix it by using std::make_tuple().
Fixes: a80d38109f65 ("android: camera_device: Calculate metadata size")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Specify the license of the Feather icons files in the .reuse/dep5 file.
Technically speaking the SVG format supports comments, SPDX could thus
be used, but that would be impractical both due to the large number of
files, and the fact that they would then diverge from the upstream
project.
We can remove the README.md file, as it now only contains redundant or
incorrect information: the license and project URL are contained in the
DEP5 file, and the comment related to generation of the GRC file is
outdated as the file is now manually edited to only include the icons
that we need.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Some files can't use SPDX as they don't support comments. This is the
case of the JSON files used by the Raspberry Pi IPA and camera tuning
tools, as well as the PGM reference picture in the camera tuning tool.
The REUSE specification allows handling this case in two different ways:
- Adding a ${file}.license file containing the license specification
alongside each file.
- Adding a .reuse/dep5 file, in Debian machine-readable copyright format
(as specified in
https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/).
The first option isn't practical, use the latter.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add missing SPDX headers to miscellaneous small files. Use CC0-1.0 for
meson.build, .gitignore and the small include/linux/README, and licenses
matching the corresponding component for other files.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Swap the pipeline handler to use "LGPL-2.1-or-later" license. This is
to unify with the libcamera core source code license.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Starting from Qt v5.15.0, the QTextStreamFunctions::fixed function
used to configure formatting on QTextStream is deprecated in favour of
Qt::fixed. This causes a compilation error:
../src/qcam/main_window.cpp:634:16: error: ‘QTextStream& QTextStreamFunctions::fixed(QTextStream&)’ is deprecated: Use Qt::fixed [-Werror=deprecated-declarations]
634 | << "fps:" << fixed << qSetRealNumberPrecision(2) << fps;
| ^~~~~
Fix it by using Qt::fixed, and provide backward compatibility with Qt
versions older than v5.14.0 that didn't provide Qt::fixed.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # 5.12.8
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an entry for MJPEG in V4L2CameraProxy's PixelFormatInfo list to
allow proper calculation of sizeimage for MJPEG, such that the
parameters to mmap can align properly instead of failing. This allows
MJPEG to be used in the V4L2 compatibility layer.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The V4L2 compatibility layer uses devnum to match video device nodes to
libcamera Cameras. Some pipeline handlers don't report a devnum for
their camera, which prevents the V4L2 compatibility layer from matching
video device nodes to these cameras. To fix this, we first allow the
camera manager to map multiple devnums to a camera. Next, we walk the
media device and entity list and tell the camera manager to map every
one of these devnums that is a video capture node to the camera.
Since we decided that all video capture nodes that belong to a camera
can be opened via the V4L2 compatibility layer to map to that camera, it
would cause confusion for users if some pipeline handlers decided that
only specific device nodes would map to the camera. To prevent this
confusion, remove the ability for pipeline handlers to declare their own
devnum-to-camera mapping. The only pipeline handler that declares the
devnum mapping is the UVC pipeline handler, so remove the devnum there.
We considered walking the media entity list and taking the devnum from
just the one with the default flag set, but we found that some drivers
(eg. vimc) don't set this flag for any entity. Instead, we take all the
video capture nodes (entities with the sink pad flag set).
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Translate the Android format code to the libcamera format code
at stream configuration time, using the translation map built at
camera device initialization time.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Replace the hardcoded stream configuration map with the information
collected at CameraDevice initialization time.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
As we move to have more and more dynamically generated static metadata
entries, the size of the metadata buffer has to be calculated
dynamically inspecting the information collected from the camera.
Provide a method to perform metadata buffers size calculation and
use it when generating camera static metadata.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Initialize the stream configuration map by applying the Android Camera3
requested resolutions and formats to the libcamera Camera device.
For each required format test a list of required and optional
resolutions, construct a map to translate from Android format to the
libcamera formats and store the available stream configuration to
be provided to the Android framework through static metadata.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The NV24 pixelFormatInfo table entry defines an incorrect horizontal
sub-sampling.
Update to the correct value.
Fixes: 29c5508075c1 ("v4l2: camera_proxy: Create format info array")
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The hex stream output helper was introduced in f391048a7b98 ("libcamera: utils:
Add hex stream output helper"). It simplifies writing hexadecimal values to an
ostream which can be used in this test too. As the helper doesn't modify the
stream configuration (refer to utils::hex() documentation), this eliminates the
need of restoring the stream's format state as pointed out by the coverity scan.
Reported-by: Coverity CID=279058
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2 compatibility layer keeps track of the index of the next buffer
to be dequeued, to handle VIDIOC_DQBUF. This index is set to 0 on
startup and incremented (modulo #frames), and is otherwise never reset.
This means that if the last handled frame index is not #frames-1, and
the stream is restarted without restarting libcamera and the V4L2
compatilibity layer, the buffer index number won't match with the
libcamera buffer index number, causing a segfault. Fix this by resetting
the current buffer index to zero on VIDIOC_STREAMON.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To support polling, we need to be able to signal when data is
available to be read (POLLIN), as well as events (POLLPRI). Add the
necessary calls to eventfd to allow signaling POLLIN. We signal POLLIN
by writing writing to the eventfd, and clear it by reading from the
eventfd, upon VIDIOC_DQBUF.
Note that eventfd does not support signaling POLLPRI, so we don't yet
support V4L2 events.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If VIDIOC_REQBUFS returns -EINVAL, it signals to the application that
the requested buffer or memory type is not supported. If we return
-EINVAL due to a zero sizeimage, then the application will think that we
don't support a memory type that we actually do. We cannot error on a
zero sizeimage, because reqbufs could be called merely to probe what IO
methods we support; qv4l2, for example, called reqbufs once with userptr
and once more with mmap, both times with count=1.
On the other hand, sizeimage will be zero for formats whose size we
don't know how to calculate, such as MJPEG. If we try to stream such
formats anyway, we will get a floating point exception and crash. Issue
a warning for now, and don't return -EINVAL, so that we can continue
operation.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We use a semaphore to atomically keep track of how many buffers are
available for dequeueing. The check for how to acquire the semaphore was
incorrect, leading to a double acquire upon a successful nonblocking
acquire. Fix this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
VIDIOC_ENUM_FMT is meant to return -EINVAL if the requested index is out
of bounds. This bounds is obtained from the libcamera Camera's list of
formats. The bounds check for this list was incorrect; fix it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
As the only usage of IPAManager::instance() is by the pipeline handlers
to call IPAManager::createIPA(), remove the former and make the latter
static. Update the pipeline handlers and tests accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
If any ipa_context instances are destroyed after the IPAManager is
destroyed, then a segfault will occur, since the modules have been
unloaded by the IPAManager and the context function pointers have been
freed.
Fix this by making the lifetime of the IPAManager explicit, and make the
CameraManager construct and deconstruct (automatically, via a unique
pointer) the IPAManager.
Also update the IPA interface test to do the construction and
deconstruction of the IPAManager, as it does not use the CameraManager.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Given how the elfSection() function uses the sub-expression
(idx * eHdr->e_shentsize)
it has effectively two (16 bits, unsigned) operands.
The sub-expression is promoted to type int (32 bits, signed) for
multiplication and then added to eHdr->e_shoff, which is uint32_t on
32-bit platforms and uint64_t on 64-bit platforms. Since eHdr->e_shoff
is unsigned, the integer conversion rules dictate that the other signed
operand (i.e. the result of aforementioned sub-expression) will be
converted to unsigned type too. This causes sign-extension for both of
the above operands to match eHdr->e_shoff's type and should be avoided.
The solution is to explicitly cast one of the operands of the
sub-expression with unsigned int type. Hence, the other operand will be
integer promoted and the resultant will also be of unsigned int type,
not requiring to bother about a sign-extension.
Reported-by: Coverity CID=280008
Reported-by: Coverity CID=280009
Reported-by: Coverity CID=280010
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Refactor the code to find section into a common helper function.
This commit introduces no functional changes.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The PixelFormat class is a lightweight wrapper around a 32-bit FourCC
and a 64-bit modifier. Make is usable as a constexpr.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
With the internal headers now in include/libcamera/internal/, we may
have identically named headers in include/libcamera/. Their header
guards would clash. Rename the header guards of internal headers to
prevent any issue.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The control_ids.h.in and property_ids.h.in headers use C++-style
comments, when the coding style mandates C-style comments. Fix them.
While at it, adjust three minor typos in comments.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The libcamera source files are named after class names, using
snake_case. pixelformats.h and pixelformats.cpp don't comply with that
rule. Fix them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The preprocessor directive '#pragma once' is non-standard, replace it
with the include guard used elsewhere in libcamera.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Virtual functions overriden in derived classes should be marked with the
override keyword. Do so for the logPrefix() implementations inheriting
from the Loggable class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Fix a typo in a comment in ipa_context_wrapper.cpp.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
LD_PRELOAD is an environment variable, use code markup to reflect that
semantic
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
