summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-06ipa: rpi: Set lens position to hyperfocal on startupNaushir Patuck
On the first ipa->configure() call, set the lens position (if a lens is present) to the default position. Typically this would be the hyperfocal position based on the tuning data. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-06pipeline: ipa: rpi: Return lens controls from ipa->configure()Naushir Patuck
In addition to sensor controls, return lens controls from IpaBase::configure() back to the pipeline handler. If there are lens controls present in the ControlList, action them in the pipeline handler as part of the configure routine. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-06libcamera: controls: Define a default lens position behaviourNaushir Patuck
Update the AfMode control description to explicitly define a startup/default behaviour. On startup, the camera will move the lens to the position given by the default value of the LensPosition control if operating in manual focus mode. Typically this would be the hyperfocal position of the lens. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-06ipa: rkisp1: agc: Restore minimum analogue gain limitJacopo Mondi
Commit a3178dd0391f ("ipa: rkisp1: agc: drop hard-coded analogue gain range") removed both minimum and maximum limits for the analogue gain value. However, as some sensors can potentially have a minimum gain lower than 1.0, restore the check for the minimum limit. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-06ipa: ipu3: agc: Drop hard-codec analogue gain maxJacopo Mondi
As the sensor's analogue gain range is known, drop the arbitrary maximum limit for the sensor analogue gain. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-06libipa: camera_sensor_helper: Restore alphabetical orderBenjamin Bara
The addition of the CameraSensorHelperImx327 class was not correctly inserted in alphabetical sort order. Move it to the correct location. Fixes: 7d5b38e2ef41 ("libipa: camera_sensor_helper: Add IMX327 helper") Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-05libcamera: controls: Drop reference to IPA in controls documentationLaurent Pinchart
The controls relates to the public API, which doesn't expose IPA modules as they are internal to libcamera. Replace the mention of "IPA" in the controls documentation. While at it, fix a small text reflow issue. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-05ipa: rpi: Handle controls for mono variant sensorsNaushir Patuck
Do not advertise colour related controls (i.e. [A]WB, colour saturation) in the ControlInfoMap of available controls returned out to the application. Silently ignore these controls in the control handler in case applications don't use the advertised ControlInfoMap to validate controls. As a drive-by fix, don't advertise controls::ColourCorrectionMatrix in the ControlInfoMap as it is not handled by the IPA. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-05camera_sensor: ipa: core: Add CFA pattern to IPACameraSensorInfoNaushir Patuck
Add a new cfaPattern field to the IPACameraSensorInfo to pass the CFA/Bayer pattern for the current sensor configuration to the IPA. This field takes a value from properties::draft::ColorFilterArrangementEnum. Populate cfaPattern in CameraSensor::sensorInfo(), called by the pipeline handler before it calls ipa->init() and ipa->config(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-04py: unittests.py: Fix type checker warningsTomi Valkeinen
Fix type checker warnings by dropping unused imports and using _ for variable names that are not used. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-04py: Fix code formattingTomi Valkeinen
Fix code formatting. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-04subprojects: Drop leftovers of pybind11Tomi Valkeinen
The pybind11 subproject was removed in commit ad4719c10c6a ("py: Move to mainline pybind11 version"), but two traces remained, one in .gitignore and a second one as a meson.build for pybind11. Remove them. Fixes: ad4719c10c6a ("py: Move to mainline pybind11 version") Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-02ipa: rpi: imx296: Small refinements to the IMX296 mono sensor tuningNaushir Patuck
Update the noise profile and reference lux level with newly taken calibration pictures. Remove GEQ/cross-talk processing block as this is a mono sensor. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-31py: Move to mainline pybind11 versionTomi Valkeinen
We are using pybind11 'smart_holder' branch to solve the Camera destructor issue (see the comment in this patch, or the commit that originally added Python bindings support). As it would be very nice to use the mainline pybind11 (which is packaged in distributions), this patch adds a workaround allowing us to move to the mainline pybind11 version. The workaround is simply creating a custom holder class (PyCameraSmartPtr), used only for the Camera, which wraps around the shared_ptr. This makes the compiler happy. Moving to mainline pybind11 is achieved with: - Change the pybind11 wrap to point to the mainline pybdind11 version - Tell pybind11 to always use shared_ptr<> as the holder for PyCameraManager, as we use the singleton pattern for the PyCameraManager, and using shared_ptr<> to manage it is a requirement - Tell pybind11 to always use PyCameraSmartPtr<> as the holder for Camera - Change the meson.build file to use a system-installed pybind11 Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-30py: unittests.py: Add weakref helpers and use delTomi Valkeinen
Add helpers to check if a weakref or a list of weakrefs is alive or dead. Also use 'del' for local variables instead of setting the variable to None. This makes debugging the test easier as the locals will be gone from locals() dict. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-30py: Use exceptions instead of returning error codesTomi Valkeinen
We have multiple methods which return an error code, mimicking the C++ API. Using exceptions is more natural in the Python API, so change all those methods to raise an Exception instead. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-30py: Move ColorSpace and Transform classes to separate filesTomi Valkeinen
Move ColorSpace and Transform classes to separate files from the main py_main.cpp, for clarity. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-30py: Fix CameraManager.version propertyTomi Valkeinen
The current CameraManager.version doesn't work at all (raises a TypeError), as that's not how you use expose C++ static methods as Python class methods. Fix it. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-30android: mm: Stub libhardware for build testsLaurent Pinchart
Commit 66c618f378aa ("android: mm: generic: use GRALLOC_HARDWARE_MODULE_ID") made libhardware a required dependency for the Android camera HAL on non-Chrome OS platforms. This isn't an issue for real devices, as Android provides libhardware, but it prevents compile-testing the camera HAL on traditional Linux systems. To restore the compile-test coverage, stub the libhardware function used by the camera HAL when libhardware isn't found. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # meson build test Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-30android: mm: generic: use GRALLOC_HARDWARE_MODULE_IDMattijs Korpershoek
PlatformFrameBufferAllocator is an abstraction over gralloc. Right now hardwareModule_ points towards a CAMERA_HARDWARE_MODULE_ID. When gralloc_open() is called we observe: libcamera: DEBUG HAL camera3_hal.cpp:75 Open camera gpu0 libcamera: ERROR Camera camera.cpp:524 Camera in Configured state trying acquire() requiring state Available 01-23 14:14:04.742 370 416 E libcamera: FATAL HAL generic_frame_buffer_allocator.cpp:105 gralloc_open() failed: -87 Which is wrong, gralloc_open() is attempting to re-open the camera HAL, instead of the gralloc HAL. Point to a GRALLOC_HARDWARE_MODULE_ID instead so that we can request buffers from gralloc in android. Note: this adds new dependencies on android's libhardware [1] and on libdl. [1] https://android.googlesource.com/platform/hardware/libhardware Fixes: c58662c5770e ("android: Introduce PlatformFrameBufferAllocator") Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-24libcamera: camera_sensor: Add Sony IMX327 sensor propertiesBenjamin Bara
Copy the sensor properties from Sony IMX290, as the IMX327 is a variant of it. Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [Kieran: Adjust sort order] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-24pipeline: rpi: ipa_base: Parse config files after platformRegister()Naushir Patuck
If a user uses a pipeline handler config file where a custom timeout value is specified, it would lead to a segmentation fault when loadPipelineConfiguration() tried to access the as yet uninitialised V4L2VideoDevice object. To fix this, parse the pipeline handler config file only after fully initialising and registering the pipeline handler and V4L2VideoDevice objects. Fixes: 6c71ee1f15305 ("pipeline: raspberrypi: Introduce PipelineHandlerBase class") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-19libipa: camera_sensor_helper: Add IMX327 helperBenjamin Bara
Add support for the Sony IMX327, which is added to the kernel with commit 2d41947ec2c0 ("media: i2c: imx290: Add support for imx327 variant"). It is basically a derivate of the IMX290, therefore also derive the helper. Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-19ipa: rkisp1: agc: drop hard-coded analogue gain rangeBenjamin Bara
As the sensor's analogue gain range is known (read-out in IPARkISP1::configure()), drop the limiting hard-coded range. This enables better performance in low-light conditions for sensors with a higher gain (e.g. the imx327). Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-09meson: Fix usage of overwritten pipeline variableLaurent Pinchart
When iterating over enabled pipelines and IPA modules, libcamera descends into subdirectories in a recursive manner, which involves nested loops. Both the outer and inner loops use the same loop variable named 'pipeline'. As the outer loop uses the variable after descending into the inner directory, it ends up using an incorrect value. Fix it by moving all use of the variable before the subdir() call, and add a comment that warns about the issue to avoid reintroducing it. Fixes: e8526c0c2bc6 ("ipa: meson: Allow nested IPA directory structures") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-05-08libcamera: ipa_manager: Allow IPA loading in nested subdirsJacopo Mondi
Now that we allow IPA modules to live in nested directories for the RaspberryPi platform, it is required to allow parsing one more level to be able to run libcamera from the source directory. Without this patch the $(builddir)/src/ipa/rpi/vc4/ipa_rpi_vc4.so IPA module cannot be loaded. The issue is only present when running from the source directory as when libcamera is installed all IPA modules are deployed to a single $(prefix)/$(libcamera_libdir)/libamera/ location. Fixes: 46aefed208fe ("pipeline: meson: Allow nested pipeline handler directory structures") Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-05-08libcamera: v4l2_videodevice: Use O_CLOEXEC when exporting DMA buffersElias Naur
Files opened internally in libcamera without the O_CLOEXEC file will remain open upon a call to one of the exec(3) functions. As exec() doesn't destroy local or global objects, this can lead to various side effects. Avoid this by opening file descriptors with O_CLOEXEC for all internal files. The O_CLOEXEC flag should also be set when obtaining file handles from the V4L2 VIDIOC_EXPBUF operation, but was missed during the updates to both d942bdc913c5 ("libcamera: v4l2_device: openat(2) with O_CLOEXEC to cleanup after exec(3)") and 436b38fd89fe ("libcamera: Open files with O_CLOEXEC"). Set the O_CLOEXEC flag on calls to ioctl(VIDIOC_EXPBUF). Fixes: 436b38fd89fe ("libcamera: Open files with O_CLOEXEC") Signed-off-by: Elias Naur <mail@eliasnaur.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04v4l2: Move the v4l2 compat layer to libexec/libcameraKieran Bingham
Move the v4l2-compat.so shared library installation to the libcamera directory under libexec. This is the same location that the proxy workers live and will facilitate easier packaging of the V4L2 compatibility layer with distributions. Create a new libcamera_libexecdir variable within meson to simplify representation of this path and update the proxy worker meson.build infrastructure to make use of it as well. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-04pipeline: raspberrypi: Add stream flags to RPi::StreamNaushir Patuck
Add a flags_ field to indicate stream state information in RPi::Stream. This replaces the existing external_ and importOnly_ boolean flags. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04pipeline: raspberrypi: Introduce PipelineHandlerBase classNaushir Patuck
Create a new PipelineHandlerBase class that handles general purpose housekeeping duties for the Raspberry Pi pipeline handler. Code the implementation of new class is essentially pulled from the existing pipeline/rpi/vc4/raspberrypi.cpp file with a small amount of refactoring. Create a derived PipelineHandlerVc4 class from PipelineHandlerBase that handles the VC4 pipeline specific tasks of the pipeline handler. Again, code for this class implementation is taken from the existing pipeline/rpi/vc4/raspberrypi.cpp with a small amount of refactoring. The goal of this change is to allow third parties to implement their own pipeline handlers running on the Raspberry Pi without duplicating all of the pipeline handler housekeeping tasks. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04pipeline: raspberrypi: Make RPi::Stream::name() return const std::string &Naushir Patuck
Return a const std::string reference from RPi::Stream::name() to avoid copying a string when not needed. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04ipa: raspberrypi: agc: Move weights out of AGCDavid Plowman
The region weights for the the AGC zones are handled by the AGC algorithm. Apply them directly in the IPA (vc4.cpp) to the statistics that we pass to the AGC. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04ipa: raspberrypi: Introduce IpaBase classNaushir Patuck
Create a new IpaBase class that handles general purpose housekeeping duties for the Raspberry Pi IPA. The implementation of the new class is essentially pulled from the existing ipa/rpi/vc4/raspberrypi.cpp file with a minimal amount of refactoring. Create a derived IpaVc4 class from IpaBase that handles the VC4 pipeline specific tasks of the IPA. Again, code for this class implementation is taken from the existing ipa/rpi/vc4/raspberrypi.cpp with a minimal amount of refactoring. The goal of this change is to allow third parties to implement their own IPA running on the Raspberry Pi without duplicating all of the IPA housekeeping tasks. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04pipeline: ipa: raspberrypi: Restructure the IPA mojom interfaceNaushir Patuck
Restructure the IPA mojom interface to be more consistent in the use of the API. Function parameters are now grouped into *Params structures and results are now returned in *Results structures. The following pipeline -> IPA interfaces have been removed: signalQueueRequest(libcamera.ControlList controls); signalIspPrepare(ISPConfig data); signalStatReady(uint32 bufferId, uint32 ipaContext); and replaced with: prepareIsp(PrepareParams params); processStats(ProcessParams params); signalQueueRequest() is now encompassed within prepareIsp(). The following IPA -> pipeline interfaces have been removed: runIsp(uint32 bufferId); embeddedComplete(uint32 bufferId); statsMetadataComplete(uint32 bufferId, libcamera.ControlList controls); and replaced with the following async calls: prepareIspComplete(BufferIds buffers); processStatsComplete(BufferIds buffers); metadataReady(libcamera.ControlList metadata); Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04pipeline: raspberrypi: rpi_stream: Set invalid buffer to id == 0Naushir Patuck
At present, the RPiStream buffer ids == -1 indicates an invalid value. As a simplification, use id == 0 to indicate an invalid value. This allows for better code readability. As a consequence of this, use unsigned int for the buffer id values. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04pipeline: ipa: raspberrypi: Refactor and move the Raspberry Pi codeNaushir Patuck
Split the Raspberry Pi pipeline handler and IPA source code into common and VC4/BCM2835 specific file structures. For the pipeline handler, the common code files now live in src/libcamera/pipeline/rpi/common/ and the VC4-specific files in src/libcamera/pipeline/rpi/vc4/. For the IPA, the common code files now live in src/ipa/rpi/{cam_helper,controller}/ and the vc4 specific files in src/ipa/rpi/vc4/. With this change, the camera tuning files are now installed under share/libcamera/ipa/rpi/vc4/. To build the pipeline and IPA, the meson configuration options have now changed from "raspberrypi" to "rpi/vc4": meson setup build -Dipas=rpi/vc4 -Dpipelines=rpi/vc4 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04pipeline: meson: Allow nested pipeline handler directory structuresNaushir Patuck
The current pipeline handler build files require a flat directory struture for each pipeline handler. Modify the build files to remove this restriction and allow a directory structure such as: src/libcamera/pipeline/ |- raspberrypi |- common |- vc4 |- rkisp1 |- ipu3 where each subdir (e.g. raspberrypi/common, raspberrypi/vc4) has its own meson.build file. Such a directory structure will be introduced for the Raspberry Pi pipeline handler in a future commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04ipa: meson: Allow nested IPA directory structuresNaushir Patuck
The current IPA build files require a flat directory structure for the IPAs. Modify the build files to remove this restriction and allow a directory structure such as: src/ipa |- raspberrypi |- common |- cam_helpers |- controller |- vc4 |- rkisp1 |- ipu3 where each subdir (e.g. raspberrypi/common, raspberrypi/cam_helper) has its own meson.build file. Such a directory structure will be introduced for the Raspberry Pi IPA in a future commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04libcamera: ipa: Remove character restriction on the IPA nameNaushir Patuck
Remove the restriction on using the '/' character in the IPA name string. This allows more flexibility in IPA directory structures where different IPA modules might live in subdirectories under the usual src/ipa/<platform>/ top level directory. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04meson: ipa: Add mapping for pipeline handler to mojom interface fileNaushir Patuck
Allow an arbitrary mapping between the pipeline handler and IPA mojom interface file in the build system. This removes the 1:1 mapping of pipeline handler name to mojom filename, and allows more flexibility to pipeline developers. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04apps: qcam: Remove redundant checkBarnabás Pőcze
The switch statement checks `roles.size()` with cases for 1 and 2, so in the `default` branch, `role.size() > 2`, i.e. it is always different from 1, so the check is unnecessary. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-05-03libcamera: pipeline: simple: Add support for ST's DCMIPPDaniel Scally
The STM32 contains a camera pipeline known as the DCMIPP (Digital Camera-Memory Interface Pixel Processor) which receives data from a parallel interface and dumps the post-processed data to memory. The pipeline is capable of some processing in the form of downscaling captured data through cropping or skipping the sensor's output. The simple pipeline handler is quite capable of handling the DCMIPP given its operation is handled entirely through configuring the pads of a media graph, so add support for the driver to the pipeline's supportedDevices array. Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-01libcamera v0.0.5Kieran Bingham
Bugfixes: - meson: Ignore -Wredundant-move with gcc-13 and newer - cam: file_sink: Workaround gcc-13 dangling-reference false positive - libcamera: Open files with O_CLOEXEC - meson: Fix git version parsing - libcamera: camera_manager: Stop exponential explosive calls to createPipelineHandlers - py: cam: Fix demosaic overflow issue - libcamera: base: Make the registration of log categories atomic Core: - test: controls: control_info_map: Test default constructor - controls: guard ControlInfoMap against nullptr idmap_ - device_enumerator_udev: Use std::string_view - formats: Add 14-bits Bayer RAW formats - device_enumerator_udev: Remove devnum from dependency map - meson: libcamera: Report IPA signature method - meson: Align handling of build metadata - converter: Check converter validity - Keep using syslog for isolated IPA modules - utils: ipc: Update parser.py - utils: checkstyle.py: Don't run commit title checker on staged commits - framebuffer: Allow inheritance of FrameBuffer - Remove transform from V4L2SubdeviceFormat - libcamera: camera_sensor: Add tryFormat() - camera_sensor: Fix typo in comment - camera_sensor: Demote flip support message to Debug - internal: tracepoints: Use correct include directive - libcamera: camera: Ensure queued requests are invalid ipa: - doc: Clarify IPA acronym in its namespace description - rkisp1: Add tuning files for PinephonePro sensors - rkisp1: Add tuning files for Google DRU "Scarlet" sensors - rkisp1: lsc: Fix integer division error - libipa: Add OV2685 Camera Sensor Helper - libipa: Add OV5647 Camera Sensor Helper - raspberrypi: agc: Add "shadows" constraint mode - raspberrypi: generalise algorithms - raspberrypi: Fix default frame durations calculation - raspberrypi: Ensure shutter speed and gain are clipped in the AGC - raspberrypi: Use the new sensor limits fields in CameraMode - raspberrypi: Add sensor mode limits to CameraMode - raspberrypi: Fix crash under LTO - raspberrypi: imx296: Minor tuning updates - raspberrypi: agc: Fix overflow in Y value calculation - raspberrypi: Better heuristics for calculating Unicam timeout - raspberrypi: Generalise statistics - raspberrypi: Change Unicam timeout handling pipeline: - simple: Validate transform - imx8-isi: Remove mbusCode from formatsMap_ - imx8-isi: Automatically select media bus code - imx8-isi: Split Bayer/YUV config generation - imx8-isi: Break out RAW/YUV format selection - raspberrypi: Iterate over all Unicam instances in match() - raspberrypi: Add a Unicam timeout override config options - raspberrypi: Always use ColorSpace::Raw for raw streams - raspberrypi: Drop unused code - ipu3: Drop unused code apps: - cam: kms_sink: Drop unique_ptr<> from DRM::AtomicRequest - cam Return std::optional<> from StreamKeyValueParser::parseRole() - android: jpeg: Add JEA implementation ABI Compliance: * abi-compliance-checker reports 98.6% ABI and 100% API compatibility with with v0.0.4 Total binary compatibility problems: 1, warnings: 1 Total source compatibility problems: 0, warnings: 0 - First virtual method ~__dt ( ) has been added to this class. 1) The layout of type structure has been shifted by 8 bytes by the added v-table pointer. 2) Size of class has been increased by 8 bytes. affected symbols: 6 (1.4%) FrameBuffer::releaseFence ( ) FrameBuffer::setCookie ( uint64_t cookie ) FrameBuffer::cookie ( ) FrameBuffer::planes ( ) FrameBuffer::request ( ) FrameBuffer::metadata ( ) This ABI breakage was introduced by: 4843bfa66dc1 ("libcamera: framebuffer: Allow inheritance of FrameBuffer") Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-01cam: file_sink: Workaround gcc-13 dangling-reference false positiveEric Curtin
A new warning has been introduced to gcc-13 that produces a false positive on the cam file sink object: src/cam/file_sink.cpp:92:45: error: possibly dangling reference to a temporary [-Werror=dangling-reference] 92 | const FrameMetadata::Plane &meta = buffer->metadata().planes()[i]; | ^~~~ src/cam/file_sink.cpp:92:81: note: the temporary was destroyed at the end of the full expression '(& buffer->libcamera::FrameBuffer::metadata())->libcamera::FrameMetadata::planes().libcamera::Span<const libcamera::FrameMetadata::Plane>::operator[](i)' 92 | const FrameMetadata::Plane &meta = buffer->metadata().planes()[i]; | ^ cc1plus: all warnings being treated as errors Workaround this issue by refactoring the code to take a local const copy of the bytesused value, rather than a local const reference to the plane. Bug: https://bugs.libcamera.org/show_bug.cgi?id=185 Bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107532 Co-developed-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [Kieran: Commit and comment reworded prior to merge] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-01meson: Ignore -Wredundant-move with gcc-13 and newerLaurent Pinchart
Starting from 13.1, gcc implements the C++23 version of automatic move from local variables in return statements (see https://en.cppreference.com/w/cpp/language/return). As a result, some previously required explicit `std::move()` in return statements generate warnings. This is the case when a function returns an object whose type is a class derived from the class type the function returns: struct U { }; struct T : U { }; U f() { T t; return t; } Up to C++20, the automatic move from local variables selects the move constructor of class U, which is not the move constructor of the expression. Overload resolution is then performed a second time, with t considered as an lvalue. An explicit `std::move(t)` is needed in the return statement to select the U move constructor. Starting from C++23, `t` is treated as an xvalue, and the U move constructor is selected without the need for an explicit `std::move(t)`. An explicit `std:move()` then generates a redundant-move warning, as in the valueOrTuple() function in src/py/libcamera/py_helpers.cpp. Omitting the `std::move()` silences the warning, but selects the copy constructor of U with older gcc versions and with clang, which negatively impacts performance. The easiest fix is to disable the warning. With -Wpessimizing-move enabled, the compiler will still warn of pessimizing moves, only the redundant but not pessimizing moves will be ignored. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-01ipa: rkisp1: Add tuning files for PinephonePro sensorsJacopo Mondi
Add to the RkISP1 data configuration files for the imx258 and ov8858 sensors found on Pine64 PinephonePro devices. The tuning file contain LSC tables extracted from the Rockchip Android BSP the PinephonePro ships with. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Tested-by: Robert Mader <robert.mader@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-01ipa: rkisp1: Add tuning files for Google DRU "Scarlet" sensorsJacopo Mondi
Add to the RkISP1 data configuration files for the ov2685 and ov5695 sensor found on Google DRU "Scarlett" tablet. The tuning files contain LSC tables extracted from the Google Chrome Android HAL configuration files, available at src/overlays/overlay-scarlet/media-libs/cros-camera-hal-configs-scarlet/files/IQ/ at revision "stabilize-14790.B". Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-01pipeline: simple: Validate transformRobert Mader
Just like we do for other pipeline handlers already. This ensures we corretly pass on transforms that are not handled by the sensor - e.g. rotations - back to the app via the config, which is required on devices like the Pinephone. Signed-off-by: Robert Mader <robert.mader@collabora.com> Tested-by: Arnav Singh <me@arnavion.dev> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-04-30libcamera: imx8-isi: Remove mbusCode from formatsMap_Jacopo Mondi
Now that the media bus code selection procedure does not depend on the ISICameraConfiguration::formatsMap_ remove the association between PixelFormat supported by the ISI and the media bus code produced by the sensor. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-30libcamera: imx8-isi: Split Bayer/YUV config generationJacopo Mondi
At generateConfiguration() a YUV/RGB pixel format is preferred for the StillCapture/VideoRecording/Viewfinder roles, but currently there are no guarantees in place that the sensor provides a non-Bayer bus format from which YUV/RGB can be generated. This makes the default configuration generated for those roles not to work if the sensor is a RAW-only one. To improve the situation split the configuration generation in two, one for YUV modes and one for Raw Bayer mode. StreamRoles assigned to a YUV mode will try to first generate a YUV configuration and then fallback to RAW if that's what the sensor can provide. As an additional requirement, for YUV streams, the generated mode has to be validated with the sensor to confirm the desired sizes can be generated as the ISI cannot up-scale. In order to test a format use the newly introduced CameraSensor::tryFormat(). Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Tested-by: Daniel Scally <dan.scally@ideasonboard.com>