summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-29apps: lc-compliance: Check that requests complete successfullyNícolas F. R. A. Prado
When a request fails to queue it is completed but with its status set to RequestCancelled. Add a check in the requestComplete callback to make sure that the request was completed successfully. For the SimpleCaptureUnbalanced test we need to do this check only if the capture isn't over yet, otherwise the few extra requests that get cancelled at the end, which is the normal behavior, will make the test fail. Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2023-12-29apps: lc-compliance: Fix source file ordering in meson.buildNícolas F. R. A. Prado
The capture_test.cpp file was added in the source list of meson in the wrong place. Fix it so the list is alphabetically sorted. Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-12-29[DNI] apps: cam: Print require propertiesJacopo Mondi
Do not include, only to validate the implementation. When run on a VIMC camera: $ ./build/src/apps/cam/cam -c1 -p Using camera platform/vimc.0 Sensor B as cam0 Property: SystemDevices = [ 20740, 20741, 20742 ] Property: PixelArrayActiveAreas = [ (0, 0)/4096x2160 ] Property: PixelArraySize = 4096x2160 Property: Rotation = 0 [REQUIRED] Property: Model = Sensor B Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-12-29libcamera: Add 'required' property to controlsJacopo Mondi
Add to the ControlId class a 'required' boolean flag that determine if the control (or property) is mandatory to be supported by a Camera in order to comply with the libcamera API specification. Add support for a 'required' field to the controls and properties yaml file definition and control generation scripts. Also plumb support for the flag in the control serializer component to allow pass the information across IPC borders. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-12-29ipa: rpi: vc4: Add OV64A40 tuning filesKieran Bingham
Provide the OV64A40 tuning files for the Arducam Omnivision camera module to operate on the VC4 ISP architecture on Raspberry Pi 4 and below. Signed-off-by: Lee Jackson <lee.jackson@arducam.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
2023-12-29libipa: camera_sensor_helper: Add OV64A40 helperJacopo Mondi
Add a CameraSensorHelper for the OV64A40 camera sensor. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-29ipa: rpi: Provide a Camera Helper for the OV64A40Jacopo Mondi
Support the OV64A40 sensor with a camera helper to manage the gain model, light sensitivity, and control delays. Signed-off-by: Lee Jackson <lee.jackson@arducam.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2023-12-29libcamera: camera_sensor: Add OV64A40 sensor propertiesKieran Bingham
Add an entry for the Omnivision OV64A40 Sensor which has a square pixel size of 1.008µ. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2023-12-21pipeline: rpi: Respect provided strideWilliam Vinnicombe
When converting from StreamConfiguration to V4L2DeviceFormat, the stride was being dropped with the result that users could not request a custom stride. Set the stride in the V4L2DeviceFormat to prevent this happening. Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-21libcamera: camera: Fix unused variable compiler warningLaurent Pinchart
When compiling with gcc 8.4.0, the compiler was reported to throw an unused variable warning: ../src/libcamera/camera.cpp: In member function ‘libcamera::CameraConfiguration::Status libcamera::CameraConfiguration::validateColorSpaces(libcamera::CameraConfiguration::ColorSpaceFlags)’: ../src/libcamera/camera.cpp:497:19: error: unused variable ‘i’ [-Werror=unused-variable] for (auto [i, cfg] : utils::enumerate(config_)) { ^ The build environment may have been incorrect as the problem couldn't be reproduced with gcc 8.3.0 and 8.5.0. Nonetheless, the 'i' variable is indeed unused. It turns out that the code can be simplified, as the commit that removed usage of the variable kept the now unneeded utils::enumerate() call. Simplify the code and fix the warning in one go. Fixes: 13986d6ce3ab ("libcamera: camera: Fix validateColorSpaces to choose "main" colour space") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-08meson: Replace hack with usage of '@BASENAME@'Laurent Pinchart
Starting with meson 0.59, the custom_target() function substitutes '@BASENAME@' in the output parameter with the input file name, with the extension removed. This is exactly what we implement manually when generating the IPA interface .cpp files. Furthermore, starting with meson 0.60, the 'name' positional parameter to the custom_target() function is optional, and defaults to the basename of the output file (including the extension). This is exactly the name we compute manually and pass to the function. As libcamera requires meson 0.60 or newer, we can depend on those two features and drop manual computation of the base name. This fixes a warning with recent meson versions that complain that passing a file object to the format() function is a broken feature: WARNING: Broken features used: * 1.3.0: {'str.format: Value other than strings, integers, bools, options, dictionaries and lists thereof.'} Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07README.rst: Add missing libgtest-dev dependency for lc-complianceLaurent Pinchart
lc-compliance requires gtest. When not available on the system, we install it using a meson wrap, but it is still better to install the system package. Add it as a dependency in README.rst. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: gstreamer: Remove videoconvert element from pipelineLaurent Pinchart
The GStreamer single stream test uses the following pipeline: libcamerasrc ! videoconvert ! fakesink The videoconvert element isn't useful as the data is thrown away by the fakesink anyway. We can shorten the pipeline to libcamerasrc ! fakesink to save CPU time and to avoid depending on the gstreamer1.0-plugins-base package to run the unit tests. The test could be further simplified by replacing gst_parse_bin_from_description_full() with gst_element_factory_make(), now that we only add one element to the bin. The extra cost incurred by the bin only impacts initialization time, and using a bin will make it easier to add other elements in the future if needed. Keep the bin, and only drop the videoconvert element. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: ipc: unixsocket: Increase process exit timeoutLaurent Pinchart
When running tests on slower devices, 200ms is too low to wait for the process to exit. Increase the timeout to 2s. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: log: log_process: Increase process exit timeoutLaurent Pinchart
When running tests on slower devices, 200ms is too low to wait for the process to exit. Increase the timeout to 2s. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: log: log_process: Improve debugging on process exit failuresLaurent Pinchart
When the process fails to run and exit normally, the test prints an error message that provides little information: process did not exit normally Expand the error message to print the exit status to make debugging easier. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: log: log_process: Fix uninitialized variable on process exit failureLaurent Pinchart
If the process fails to exit before the timeout, the LogProcessTest::exitStatus_ variable gets used uninitialized. Fix it by initializating to Process::NotExited. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: log: log_process: Log an error when failing due to incorrect messageLaurent Pinchart
One of the error paths in the test returns without logging a message, which makes failures difficult to debug. Fix it by adding an error message. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07meson: Tag all installed filesLaurent Pinchart
Meson uses tags to sort installed files in categories, and makes it possible to install a subset of the files using the '--tags' argument to 'meson install'. This is typically used by distributions to split the runtime, development and documentation files into separate packages. By default, meson tries to guess the correct tag for installed files, but can't always do so properly. Mark the install targets that meson can't guess with the correct install_tag. As the feature has been introduced in meson 0.60, bump the minimum meson version. The latest LTS release of all major distributions that libcamera currently targets ship a recent enough meson version. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-12-07gstreamer: Implement renegotiationJaslo Ziska
This commit implements renegotiation of the camera configuration and source pad caps. A renegotiation can happen when a downstream element decides to change caps or the pipeline is dynamically changed. To handle a renegotiation the GST_FLOW_NOT_NEGOTIATED return value has to be handled in GstLibcameraSrcState::processRequest(). Otherwise the default would be to print an error and stop streaming. To archive this in a clean way the if statement is altered into a switch statement which now also has a case for GST_FLOW_NOT_NEGOTIATED. In the case of GST_FLOW_NOT_NEGOTIATED every source pad is checked for the reconfiguration flag with gst_pad_needs_reconfigure() which does not clear this flag. If at least one pad requested a reconfiguration the function returns without an error and the renegotiation will happen later in the running task. If no pad requested a reconfiguration then the function will return with an error. In gst_libcamera_src_task_run() the source pads are checked for the reconfigure flag by calling gst_pad_check_reconfigure() and if one pad returns true and the caps are not sufficient anymore then the negotiation is triggered. It is fine to trigger the negotiation after only a single pad returns true for gst_pad_check_reconfigure() because the reconfigure flags are cleared in the gst_libcamera_src_negotiate() function. If any pad requested a reconfiguration the following will happen: 1. The camera is stopped because changing the configuration may not happen while running. 2. The completedRequests queue will be cleared by calling GstLibcameraSrcState::clearRequests() because the completed buffers have the wrong configuration. 3. The new caps are negotiated by calling gst_libcamera_src_negotiate(). When the negotiation fails streaming will stop. 4. The camera is started again. Signed-off-by: Jaslo Ziska <jaslo@ziska.de> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-07gstreamer: Add GstLibcameraSrcState::clearRequests methodJaslo Ziska
Add a clearRequests() function to GstLibcameraSrcState which clears the GstLibcameraSrcState::completedRequests_ queue. Use this new function in gst_libcamera_src_task_leave() instead of doing it manually. Signed-off-by: Jaslo Ziska <jaslo@ziska.de> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-07gstreamer: Move negotiation logic to separate functionJaslo Ziska
Move the code which negotiates all the source pad caps into a separate function called gst_libcamera_src_negotiate(). When the negotiation fails this function will return false and true otherwise. Use this function instead of doing the negotiation manually in gst_libcamera_src_task_enter() and remove the now redundant error handling code accordingly. Signed-off-by: Jaslo Ziska <jaslo@ziska.de> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-06test: gstreamer: Fix indentation in commentsLaurent Pinchart
A couple of comments are mis-indented in the gstreamer unit test. Fix them, and reflow the text while at it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-06meson_options: Sort options alphabeticallyLaurent Pinchart
The pycamera option was added at the end of the file, breaking alphabetical order. Restore it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
2023-12-04README.rst: Document dependencies for the Python bindingsLaurent Pinchart
The Python bindings require the libpython3-dev and pybind11-dev packages. Document it along the other dependencies in README.rst. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-04README.rst: Drop indirect dependencies on Qt5 packagesLaurent Pinchart
The libqt5core5a, libqt5gui5 and libqt5widgets packages are dependencies of the qtbase5-dev package. There's no need to list them explicitly. While at it, sort the qcam dependencies alphabetically. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30ipa: rpi: cac: Minor code improvements and tidyingDavid Plowman
We make a few small improvements to the code: * The arrayToSet method is prevented from overwriting the end of the array if there are too many values in the input table. If you supply a table, it will force you to put the correct number of elements in it. * The arrayToSet and setStrength member functions are turned into static functions. (There may be a different public setStrength member function in future.) * When no tables at all are given, the configuration is flagged as being disabled, so that we can avoid copying tables full of zeroes around. As a consequence, the pipeline handler too will disable this hardware block rather than run it needlessly. (Note that the tuning tool will put in a completely empty "rpi.cac" block if no CAC tuning images are supplied, benefiting from this behaviour.) * The initialise member function is removed as it does nothing. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30ipa: rpi: agc: Fix bug where AeLocked was never getting setDavid Plowman
The recent change where time-filtering is done before sorting out the digital gain means that the target exposure without digital gain is no longer set, breaking the 'AeLocked' calculation. We can use the regular (full) target exposure instead. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Fixes: 84b6327789fc ("ipa: rpi: agc: Filter exposures before dealing with digital gain") Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30documentation: Document vendor specific controls and properties handlingNaushir Patuck
Add some documentation to the pipeline handler file describing how to implement and handle vendor specific controls and properties with a small example. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30libcamera: controls: Use vendor tags for draft controls and propertiesNaushir Patuck
Label draft controls and properties through the "draft" vendor tag and deprecate the existing "draft: true" mechanism. This uses the new vendor tags mechanism to place draft controls in the same libcamera::controls::draft namespace and provide a defined control id range for these controls. This requires moving all draft controls from control_ids.yaml to control_ids_draft.yaml. One breaking change in this commit is that draft control ids also move to the libcamera::controls::draft namespace from the existing libcamera::controls namespace. This is desirable to avoid API breakages when adding new libcamera controls. So, for example, the use of controls::NOISE_REDUCTION_MODE will need to be replaced with controls::draft::NOISE_REDUCTION_MODE. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-29libcamera: control: Add vendor control id range reservationNaushir Patuck
Add a new control_ranges.yaml file that is used to reserve control id ranges/offsets for libcamera and vendor specific controls. This file is used by the gen-controls.py script to generate control id values for each control. Draft controls now have a separate range from core libcamera controls, breaking the existing numbering behaviour. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-11-29build: controls: Rework how controls and properties are generatedNaushir Patuck
Add support for using separate YAML files for controls and properties generation. The mapping of vendor/pipeline handler to control file is done through the controls_map variable in include/libcamera/meson.build. This simplifies management of vendor control definitions and avoids possible merge conflicts when changing the control_ids.yaml file for core and draft controls. With this change, libcamera and draft controls and properties files are designated the 'libcamera' vendor tag. In this change, we also rename control_ids.yaml -> control_ids_core.yaml and property_ids.yaml -> property_ids_core.yaml to designate these as core libcamera controls. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-29controls: Update argument handling for controls generation scriptsNaushir Patuck
The template file to the gen-controls.py and gen-py-controls.py is now passed in through the '-t' or '--template' command line argument instead of being a positional argument. This will allow multiple input files to be provided to the scripts in a future commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-29controls: Add vendor control/property support to generation scriptsNaushir Patuck
Add support for vendor-specific controls and properties to libcamera. The controls/properties are defined by a "vendor" tag in the YAML control description file, for example: vendor: rpi controls: - MyExampleControl: type: string description: | Test for libcamera vendor-specific controls. This will now generate a control id in the libcamera::controls::rpi namespace, ensuring no id conflict between different vendors, core or draft libcamera controls. Similarly, a ControlIdMap control is generated in the libcamera::controls::rpi namespace. A #define LIBCAMERA_HAS_RPI_VENDOR_CONTROLS is also generated to allow applications to conditionally compile code if the specific vendor controls are present. For the python bindings, the control is available with libcamera.controls.rpi.MyExampleControl. The above controls example applies similarly to properties. Existing libcamera controls defined in control_ids.yaml are given the "libcamera" vendor tag. A new --mode flag is added to gen-controls.py to specify the mode of operation, either 'controls' or 'properties' to allow the code generator to correctly set the #define string. As a drive-by, sort and redefine the output command line argument in gen-controls.py and gen-py-controls.py to ('--output', '-o') for consistency. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-29libcamera: pipeline: Fix c++20 compile warningBrett Brotherton
Fix -Wdeprecated-this-capture error when building with c++20 by explicity naming this in the capture. Signed-off-by: Brett Brotherton <bbrotherton@google.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-11-28Documentation: Fix list indentationLaurent Pinchart
reStructuredText requires list items to be indented. Fix the few offenders in the documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-28README.rst: Use code directive for all code examplesLaurent Pinchart
Most of the code examples in README.rst use the code directive, but some use literal blocks or just quoted paragraphs. Use the code directive for all code for consistency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-25Documentation: contributing: Integrate the code of conductLaurent Pinchart
Now that libcamera has an official code of conduct, mention it in the 'contributing' document with a clear indication that all community members are expected to follow the code of conduct. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-25Documentation: code-of-conduct: Add contact informationLaurent Pinchart
Replace the boilerplate "[INSERT EMAIL ADDRESS]" contact information with conduct@libcamera.org, and indicate that the people behind that e-mail address can also be contacted directly if needed. The direct contact information aims at offering more confidence to reporters than an anonymous mail alias in case they wish to report an issue with one of the core project members. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-25Documentation: code-of-conduct: Add license informationLaurent Pinchart
The Contributor Covenant is covered by the CC-BY-4.0 license. Indicate this in the file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-25Documentation: code-of-conduct: Convert to reStructuredTextLaurent Pinchart
All documentation in libcamera is in reStructuredText format. Convert the code of conduct from Markdown. No change in the contents is intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-25Documentation: Add code of conductLaurent Pinchart
Communities have standards regarding behaviours they consider acceptable or not acceptable, and expect community members to follow those standards. libcamera is no different, even if it has never clearly expressed those standards in a formal code of conduct document. Like software licenses, codes of conduct can be written in a myriad of ways. And like software licenses, using a widely adopted code of conduct instead of writing our own can help bringing clarity. One such standard code of conduct is the Contributor Covenant, stewarded by the Organization for Ethical Source. The Contributor Covenant has been adopted by the freedesktop.org organization, which hosts a large number of projects historically related to graphics, and more recently to multimedia in general. freedesktop.org offers services such as git hosting with CI, which libcamera could benefit from. There is therefore a clear incentive to choose the same code of conduct as freedesktop.org, and no known drawback. As a first step towards this, and to keep the libcamera code of conduct history clear in git, copy the original Contributor Covenant v1.4 from https://github.com/EthicalSource/contributor_covenant/. "v1.4" is ambiguous as the document initially published as v1.4 has received small (but sometimes significant) modifications over time. The version imported here ([1]) is the most recent "v1.4", from tags/2.1 (commit 8a3be1350b07 "Merge pull request #979 from JustArchi/patch-2"). [1] https://github.com/EthicalSource/contributor_covenant/blob/2.1/content/version/1/4/code-of-conduct.md Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-23gstreamer: Fix unused variable errorJaslo Ziska
Commit fd84180d7a09 ("gstreamer: Implement element EOS handling") has introduced a compilation warning with clang: ../../src/gstreamer/gstlibcamerasrc.cpp:768:23: error: unused variable 'oldEvent' [-Werror,-Wunused-variable] g_autoptr(GstEvent) oldEvent = self->pending_eos.exchange(event); ^ This seems to be a false positive, but nonetheless breaks the build. Fix it. Fixes: fd84180d7a09 ("gstreamer: Implement element EOS handling") Signed-off-by: Jaslo Ziska <jaslo@ziska.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-11-22ipa: rpi: alsc: Do not allow zero colour ratio statisticsDavid Plowman
The algorithm computes R/G and B/G colour ratio statistics which we should not allow to go to zero because there is clearly no gain you could apply to R or B to equalise them. Instead flag such regions as having "insufficient data" in the normal manner. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-11-22gstreamer: Implement element EOS handlingJaslo Ziska
This commit implements EOS handling for events sent to the libcamerasrc element by the send_event method (which can happen when pressing Ctrl-C while running gst-launch-1.0 -e, see below). EOS events from downstream elements returning GST_FLOW_EOS are not considered here. To archive this add a function for the send_event method which handles the GST_EVENT_EOS event. This function will set an atomic to the received event and push this EOS event to all source pads in the running task. Also set the GST_ELEMENT_FLAG_SOURCE flag to identify libcamerasrc as a source element which enables it to receive EOS events sent to the (pipeline) bin containing it. This in turn enables libcamerasrc to receive EOS events, for example, from gst-launch-1.0 with the -e (--eos-on-shutdown) flag applied. Bug: https://bugs.libcamera.org/show_bug.cgi?id=91 Signed-off-by: Jaslo Ziska <jaslo@ziska.de> Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2023-11-21pipeline: rpi: Add some useful logging messagesNaushir Patuck
Add a bunch of logging messages that have come in handy debugging various issues with the pipeline handler code. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-11-21libcamera: camera_sensor: Only access V4L_CID_HBLANK if existingAlain Volmat
Correct a crash in CameraSensor::init() when trying to set the V4L2_CID_HBLANK control on sensor not implementing this control. The HBLANK sensor not being mandatory for non-RAW sensors, it can happen that the sensor does not expose this control. Perform check against availability of the control prior to usage in order to avoid the crash. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-11-06pipeline: rpi: vc4: Fix drop frame bug when no ISP streams are configuredNaushir Patuck
If no ISP output streams are configured, the ISP output count is skipped for the the low res stream, and causes the drop frame logic to fail because of a count mismatch. This in-turn stops any requests from completing correctly. Fix this by ensuring the low res output is counted correctly when no ISP output streams are configured. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-06pipeline: rpi: Remove unused variableNaushir Patuck
The entityControls variable is unused, remove it. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-06libcamera: controls: Add controls for HDRDavid Plowman
We add an HdrMode control (to enable and disable HDR processing) and an HdrChannel, which indicates what kind of HDR frame (short, long or medium) has just arrived. Currently the HdrMode supports the following values: * Off - no HDR processing at all. * MultiExposureUnmerged - frames at multiple different exposures are produced, but not merged together. They are returned "as is". * MultiExposure - frames at multiple different exposures are merged to create HDR images. * SingleExposure - multiple frames all at the same exposure are merged to create HDR images. * Night - multiple frames will be combined to create "night mode" images. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>