summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-10py: Fix gen-py-control-enums.py referenceKieran Bingham
Scripts should be referenced using the meson files() directive to ensure the location is correctly identified with the relevant paths. This prevents compilation failures if the working directory does not match the source tree. Fixes: 6e92cb9dc49e ("py: Generate control enums from yaml") Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10v4l2_videodevice: Disable the watchdog timer when no buffers are queuedNaushir Patuck
Only enable/reset the watchdog timer when there are buffers queued in the V4L2 device. Otherwise, we may trigger spurious warnings when the watchdog times out even if there are no buffers queued in the device. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10libcamera: raspberrypi: Fetch correct value for SensorSensitivityDavid Plowman
These changes retrieve the correct value for sensitivity of the mode selected for the sensor. This value is known to the CamHelper which passes it across to the pipeline handler so that it can be set correctly in the camera properties. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10libcamera: Add a SensorSensitivity propertyNaushir Patuck
The SensorSensitivity property is a scaling factor that describes how sensitive the selected sensor mode is compared to other readout modes of the same sensor. For example, a binned mode might have twice the sensitivity of the full resolution mode, meaning you would get double the signal level for the same exposure and gains. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10py: Add cam.pyTomi Valkeinen
Add cam.py, which mimics the 'cam' tool. Four rendering backends are added: * null - Do nothing * kms - Use KMS with dmabufs * qt - SW render on a Qt window * qtgl - OpenGL render on a Qt window All the renderers handle only a few pixel formats, and especially the GL renderer is just a prototype. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10py: Add unittests.pyTomi Valkeinen
Add a simple unittests.py as a base for python unittests. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10py: Generate control enums from yamlTomi Valkeinen
Generate enums for controls from control_ids.yaml. The generator script has some heuristics to generate nicer enum names. E.g. instead of having "LensShadingMapMode.LensShadingMapModeOff" we get "LensShadingMapMode.Off". This heuristics may need to be updated when the yaml file is changed or new controls are added. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10Add Python bindingsTomi Valkeinen
Add libcamera Python bindings. pybind11 is used to generate the C++ <-> Python layer. We use pybind11 'smart_holder' version to avoid issues with private destructors and shared_ptr. There is also an alternative solution here: https://github.com/pybind/pybind11/pull/2067 Only a subset of libcamera classes are exposed. Implementing and testing the wrapper classes is challenging, and as such only classes that I have needed have been added so far. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10meson: Add 'check: true' for run_command() callsTomi Valkeinen
Add 'check: true/false' to all run_command() calls as suggested in https://github.com/mesonbuild/meson/issues/9300 to get rid of meson warning "You should add the boolean check kwarg to the run_command call." This makes meson fail if the executed command fails, which makes sense. [Kieran: Ignore failures on utils/genversion.sh] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10meson: Use new project_*_root() functionsTomi Valkeinen
meson.source_root() and meson.build_root() are deprecated. Use meson.project_source_root() and meson.project_build_root() instead. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10meson: Require meson 0.56+Tomi Valkeinen
Ubuntu 22.04 LTS has been released with meson 0.61.2, and it is easy to install a recent version of meson with python-pip, so let's update the required meson version to get rid of the Android compilation limitation. Additionally, going to meson 0.55 gives the ability to have patch files for git-wraps which is useful for Python bindings. 0.56 brings meson.project_source_root() and meson.project_build_root(), allowing us to get rid of the deprecated meson.source_root() and meson.build_root(). So, let's update the required meson version to 0.56. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10android: camera_hal_config: Use YamlParser to parse android HAL configHan-Lin Chen
Use YamlParser to parse android HAL config files, instead of handling YAML tokens directly, as a preparation for the further parameter extension. Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-10test: Add YamlParser testHan-Lin Chen
Add a unit test to exercise the API of the YamlParser class. Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-10libcamera: Introduce YamlParser as a helper to parse yaml filesHan-Lin Chen
Introduce YamlParser as a helper to convert contents of a yaml file to a tree based structure for easier reading, and to avoid writing parser with raw yaml tokens. The class is based on libyaml, and only support reading but not writing a yaml file. The interface is inspired by Json::Value class from jsoncpp: http://jsoncpp.sourceforge.net/class_json_1_1_value.html Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-09ipa: raspberrypi: Demote noisy message to DebugLaurent Pinchart
The message that prints all controls in a request in IPARPi::queueRequest() is noisy. Demote it from Info to Debug. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2022-05-04Documentation: Use https instead of httpQuentin Schulz
Avoid a redirection from http by using https directly. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Cc: Quentin Schulz <foss+libcamera@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-04Documentation: Fix typosQuentin Schulz
A few typos made it to the docs, so let's fix them. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Cc: Quentin Schulz <foss+libcamera@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-04Documentation: Replace ’ by 'Quentin Schulz
Replace U+2019 unicode character (’; right single quotation mark) by U+27 unicode character ('; apostrophe) as it is what most people are used to in sentences. While Sphinx seems to be rendering both the same way, it makes it easier for searching in rST files directly. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Quentin Schulz <foss+libcamera@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-04libcamera: Replace toString with operator<<() for format classesLaurent Pinchart
Now that format classes implement the stream formatting operator<<(), use it instead of the toString() function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-05-04libcamera: Add operator<<() for V4L2 format classesLaurent Pinchart
Implement the stream output operator<<() for the V4L2DeviceFormat and V4L2SubdeviceFormat classes to simplify printing them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-05-04libcamera: bayer_format: Add operator<<()Laurent Pinchart
Implement the stream output operator<<() for the BayerFormat class to simplify printing them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-05-04libcamera: Add operator<<() for pixel format classesLaurent Pinchart
Implement the stream output operator<<() for the PixelFormat and V4L2PixelFormat classes to simplify printing them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-05-04libcamera: geometry: Add missing ostream header in geometry.hLaurent Pinchart
Commit c730dc74795d ("libcamera: geometry: Add operator<< for classes in geometry") added usage of std::ostream in geometry.h but forget to include the corresponding header. Fix it to avoid future compilation breakages if indirect inclusions are changed. Fixes: c730dc74795d ("libcamera: geometry: Add operator<< for classes in geometry") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-05-04libcamera: Replace toString with operator<<() for geometry classesLaurent Pinchart
Now that geometry classes implement the stream formatting operator<<(), use it instead of the toString() function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-04libcamera: object: Silence gcc false positive error in release modeLaurent Pinchart
gcc 10 and 11 produce an error when compiling libcamera in release mode: In file included from ../../src/libcamera/base/object.cpp:13: ../../include/libcamera/base/message.h: In member function ‘void libcamera::Object::notifyThreadMove()’: ../../include/libcamera/base/message.h:58:47: error: array subscript ‘const libcamera::InvokeMessage[0]’ is partly outside array bounds of ‘libcamera::Message [1]’ [-Werror=array-bounds] 58 | Semaphore *semaphore() const { return semaphore_; } | ^~~~~~~~~~ ../../src/libcamera/base/object.cpp:280:17: note: while referencing ‘msg’ 280 | Message msg(Message::ThreadMoveMessage); | ^~~ This seems to be a false positive, given that msg->type() can never be equal to Message::InvokeMessage in Object::message() when called from Object::notifyThreadMove(), as the message is created there with the Message::ThreadMoveMessage type. The problem as been reported in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105400, but the error nonetheless needs to be fixed without waiting for a new gcc release, and a dynamic_cast does the job with a small additional runtime cost that shouldn't be a big issue, given that moving objects between threads is a rare operation. Bug: https://bugs.libcamera.org/show_bug.cgi?id=125 Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-22libcamera: geometry: Correct the string representation of RectangleHan-Lin Chen
Change the string representation of class Rectangle from "(top x left)/width x height" to "(top, left)/width x height". Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-22libcamera: geometry: Add operator<< for classes in geometryHan-Lin Chen
Add operator<< for geometry classes for easier logging. Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-15Documentation: Fix spelling errorRishikesh Donadkar
The introduction incorrectly spells the word Compatibility. Fix it Signed-off-by: Rishikesh Donadkar <rishikeshdonadkar@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-14ipa: ipu3: af: A not initialized frame ignore counter fixingKate Hsuan
A not initialized frame ignore counter (ignoreCounter_) makes the AF function not work since the ignore counter may start from a random negative number. The counter was set to kIgnoreFrame when AF is in prepare stage. Signed-off-by: Kate Hsuan <hpa@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-14ipa: RPi: Move the IPA to the ipa::RPi namespaceJean-Michel Hautbois
Simplify name-spacing of the RPi components by placing it in the ipa::RPi namespace directly. It also aligns the RPi IPA with the other ones (ipa::ipu3 and ipa::rkisp1) which already have this applied. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-14libcamera: framebuffer: Make FrameBuffer::cancel() privateDorota Czaplejewicz
FrameBuffer::cancel() is not meant to be used by applications. Move it to the FrameBuffer::Private class. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> [Kieran: Handle rebase] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-13ipa: vimc: Synchronise parameter buffer ops namingUmang Jain
Synchronise the names of the operations with respect to parameters buffer with the names used in other IPA interfaces. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-13ipa: vimc: Establish logical order of operationsUmang Jain
It is preferred that the interface definition should represent the logical order in which the operations will be called. The patch has no functional changes. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-12libcamera: camera: Ensure requests belong to the cameraKieran Bingham
Requests are created by a Camera, and can only be queued to that specific Camera. Enforce this during the public API to prevent mis-use by incorrect applications. Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-09ipa: ipu3: af: Simplify accumulations of y_itemsKieran Bingham
Simplify the accumulation of the total and variance with a ternary operator. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-09ipa: ipu3: af: Use Span for y_table_item_tKieran Bingham
Convert the y_table_item_t to a Span and use that for iteration when estimating variance of the table. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-09ipa: ipu3: af: Remove redundant memcpyKieran Bingham
The af statistics can be accessed directly from the mapped buffer. Remove the redundant memcpy, and simplify the call to afEstimateVariance(). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-09ipa: ipu3: af: Use geometry classes to perform grid centeringKieran Bingham
Use our geometry classes for Rectangle, Size and Point to identify the region of interest for the autofocus, and center it on the BDS output. This will facilitate custom ROI being passed in through controls at a later time. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-09ipa: ipu3: af: Move constants to implementationKieran Bingham
A selection of constants are imported from ChromiumOS. Move these out of the header, and simplify their documentation. Further more, add a direct reference to the location they were obtained from. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-09ipa: ipu3: af: enforce grid size restrictionsKieran Bingham
Provide enforcement of the selection of the block_{width,height}_log2 parameters to the capabilities of the hardware. While this selection is currently hardcoded to the minimum, providing the restriction now allows for further dynamic sizing in the future and documents the restrictions directly in code, making use of the already existing constants. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-04-08ipa: ipu3: Inline parseStatistics() into processStatsBuffer()Umang Jain
Since we have moved away from switch/case on the operation ID, there's little reason to split the operation in two functions. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-08ipa: ipu3: Inline fillParams() in fillParamsBuffer()Umang Jain
Since we have moved away from switch/case on the operation ID, there's little reason to split the operation in two functions. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-08ipa: ipu3: Replace event-based ops with dedicated functionsUmang Jain
The IPAIPU3 interface currently uses event-type based structures in order to communicate with the pipeline-handler (and vice-versa). Replace the event based structures with dedicated functions associated to each operation. The translated naming scheme of actions to signals are: ActionSetSensorControls => setSensorControls ActionParamFilled => paramsBufferReady ActionMetadataReady => metadataReady The translated naming scheme of events to dedicated functions are: EventProcessControls => queueRequest() EventStatReady => processStatsBuffer() EventFillParams => fillParamsBuffer() The dedicated functions are called from pipeline-handler to the IPA using IPC. These functions run asynchronously and when completed, the IPA emits the respective signals as stated above in the translated naming scheme. The EventProcessControls is translated to queueRequest() to bring symmetry to the IPU3 interface with other IPA interfaces. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-07test: v4l2_videodevice: Fix format configuration in the vimc pipelineLaurent Pinchart
The V4L2VideoDeviceTest class configures the capture pipeline with parameters that are partly hardcoded, and partly come from the current configuration of the device. In particular, with the vimc pipeline, the sensor subdevice is configured with the size retrieved from the capture video node, and the video node is then reconfigured to 640x480. Relying on the current (and thus possibly random) device configuration can lead to broken pipes when starting streaming. This currently causes failures of the dequeue_watchdog test when run after the formats test. Fix it by explicitly setting the same size for both the vimc subdevs and the video capture device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-07test: v4l2_videodevice: dequeue_watchdog: Check return value of streamOnLaurent Pinchart
If the streamOn() call fails, there is no way the test will then succeed. Catch it and return a failure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-07test: v4l2_videodevice: dequeue_watchdog: Log message on failuresLaurent Pinchart
Failing a test without an error message makes it difficult to debug issues. Add a message when buffer allocation fails. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-07libcamera: v4l2_videodevice: Fix uninitialised watchdogDuration_Umang Jain
Initialise the watchdogDuration_ member to 0ms before it is used in rest of the code base. Failing to do so, spews out log warnings regarding dequeue timer being expired. Fixes: 16f3d2de50ff ("libcamera: v4l2_videodevice: Add a dequeue timer") Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-07libcamera: base: utils: Add missing constructor for DurationLaurent Pinchart
The Duration class is missing the equivalent to the std::chrono::duration constructor that takes a number of ticks expressed as a scalar. Fix it, which allows initializing a Duration instance to 0 or 0.0. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-06libcamera: camera_sensor: Drop const on the return value of sizes()Laurent Pinchart
The sizes() function returns a value, not a reference. There's no need for it to be const. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-04-06libcamera: v4l2_videodevice: Fix typos in a commentNaushir Patuck
Is/ingore/ignore/ and s/prevetn/prevent/ Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>