| Age | Commit message (Collapse) | Author |
|---|
|
Load the initial ExpoureValue correction value from configuration
file.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that the LSC algorithm can be enabled and disabled at run-time,
move the 'enabled' flag from the context's configuration to the
algorithm's active state.
This allows to populate the LensShadingEnable metadata in the process()
function implementation.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add a test script that allows to test the LSC correction effect.
The script runs the AWB in manual mode with values taken from a previous
run with Awb in auto mode. When the AWB is disabled, enable the LSC
correction to visually see the improvements in image quality.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement LSC algorithm enable/disable by parsing the
"LensShadingEnable" control in queueRequest().
Start with the LSC algorithm enabled by default and disable it
on application request.
The 'lsc' filed in the context configuration could also be removed but
other algorithms inspect it. Do not remove it for now.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Introduce a control to enable and disable LSC and replace the
draft android control.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Replace the Lens Shading Correction table with the one from RaspberryPi
tuning file generated by the rksip1_lsc_rpi_libcamera.py script.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add a python script to parse the lens shading tables from the
RaspberryPi json tuning file.
Example invocation:
./utils/rkisp1/rkisp1_lsc_rpi_to_libcamera.py \
-f src/ipa/raspberrypi/data/imx219.json \
-a src/ipa/rkisp1/data/imx219.yaml -t 1000
The script overrides the existing "LensShadingCorrection" section
in the output .yaml configuration file.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The DefectPixelClusterCorrection::init() function contains a large
manually written piece of tuning data parsing code, with duplication of
similar but slightly different sections. This is error-prone as copy and
paste errors easily creep in and can be hard to spot.
As an attempt to address this issue, replace that code with two generic
functions tbat operate over a data table which describes the structure
of the tuning data and where it fits in the ISP configuration structure
(which maps directly to registers).
At the same time, restructure the tuning data to group parameter per
method, to organize the data in a set-method-parameter structure. The
line-threshold and line-mad-factor parameters are grouped in a "lc"
(line check) method, and the rnd-threshold and rnd-offset parameters in
a "rnd" (rank neighbour difference) method. The other parameters
(pg-factor, rg-factor and ro-limits) are directly specified in a "pg",
"rg" or "ro" method respectively without a parameter name for
simplicity.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
A few questions (hence the RFC):
- Should methods that have a single parameter (e.g. "pg") have an
explicit parameter name in YAML, to match methods that have multiple
parameters ? This would result in
pg:
green:
factor: 10
red-blue:
factor: 10
instead of
pg:
green: 10
red-blue: 10
- Should the method names be spelled out fully in YAML, instead of being
abbreviated to 2 or 3 letters ?
- Is this actually worth it ?
|
|
Handle the i.MX8MP version of the ISP. This matches the current
versioning scheme of the driver, but doesn't seem to scale very well.
|
|
The RkISP1 implementation of the LensShadingCorrection algorithm has been
made adaptive to the scene color temperature in commit 14c869c00fdd ("ipa:
rkisp1: Take into account color temperature during LSC algorithm").
The LSC algorithm interpolates the correction factors using the
table's reference color temperatures. When calculating the interpolation
coefficients, an unintended integer division makes both coefficient
zeros resulting in a completely black image.
Fix this by type casting to double one of the division operands.
Fixes: 14c869c00fdd ("ipa: rkisp1: Take into account color temperature during LSC algorithm")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
createPipelineHandlers
Currently the function `createPipelineHandlers` connects itself to the
`devicesAdded` signal at the end of each call. As the Signal object
supports multiple non-unique listeners connected to it, the former
function would be called exponentially often with each new emitted event
on `devicesAdded` (i.e. with udev plugging in a new camera)
Fix it by connecting the createPipelineHandlers() slot to `devicesAdded`
signal in CameraManager::Private::init() instead. This will prevent the
slot getting connected multiple times to the `devicesAdded` signal.
Signed-off-by: Sophie Friedrich <dev@flowerpot.me>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The pipeline handler writers guide incorrectly references the
VividCameradata::init() impelementation with a spelling error.
Fix spelling of "impelementation" in the pipeline handler development
guide.
Signed-off-by: Advait Dhamorikar <advaitdhamorikar@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Currently it is not possible to display debug output from an isolated IPA
module. The standard descriptors are all closed and any specified log
file is explicitly deactivated for the IPA module. Since libcamera and the
isolated IPA module are separate processes, they cannot write to the same
file. However, if syslog is used, then this would be possible.
If syslog is specified as a log file, then this is left as it is for the
isolated IPA module.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
When creating a new commit, there is no title, so the title checker
complains that the title isn't compliant and the commit cannot be
created if checkstyle is run as a pre-commit hook. Fix this by skipping
the title checker when run on staged changes.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of having bool return type and an out parameter, use
std::optional<libcamera::StreamRole> to return from
StreamKeyValueParser::parseRole().
Meanwhile at it, re-word an existing comment to make it lucid.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Commit 613d5402673e ("pipeline: raspberrypi: Fix handling of colour
spaces") adjusts the colorspace to ColorSpace::Raw for raw streams.
However, if the colorspace is not requested for raw streams(nullopt),
we should still set the colorspace to ColorSpace::Raw, for raw streams.
Fixes: 613d5402673e ("pipeline: raspberrypi: Fix handling of colour spaces")
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Out should really be output.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This patch adds JEA implementation to replace libjpeg in CrOS platform,
where hardware accelerator is available.
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To prepare for support of the JEA encoder in a following commit, which
will need to access the buffer_handle_t of the destination buffer, pass
the StreamBuffer to the Encoder::encoder() function. As the StreamBuffer
contains the source FrameBuffer and the destination Span, drop them from
the function arguments and access them directly from the StreamBuffer.
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To further control sources in jpeg to build based on the platform, this
patch adds meson.build in src/android/jpeg directory.
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
HALFrameBuffer is derived from FrameBuffer with access to
buffer_handle_t, which is needed for JEA usage.
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To add buffer_handle_t access in android, this patch allows inheritance
of FrameBuffer to add a derived class in android.
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit 6f6e1bf704fe ("libcamera: camera_sensor: Apply flips at
setFormat()") extended the CameraSensor::setFormat() function
to apply vertical/horizontal flips on the sensor based on the
supplied Transform. To pass the Transform to the function the
V4L2SubdeviceFormat structure has been augmented with a Transform
member.
However as the newly added Transform is not used at all in the
V4L2Subdevice class, it should not be part of V4L2SubdeviceFormat.
Fix that by removing the transform field from V4L2SubdeviceFormat
and pass it as an explicit parameter to CameraSensor::setFormat().
Fixes: 6f6e1bf704fe ("libcamera: camera_sensor: Apply flips at setFormat())
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit 1a614866a29c ("libcamera: camera_sensor: Validate Transform") has
removed usage of the RPiCameraData::supportsFlips_ but hasn't removed
the field itself, nor its initialization. Drop those as they're unused.
Fixes: 1a614866a29c ("libcamera: camera_sensor: Validate Transform")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Commit 1a614866a29c ("libcamera: camera_sensor: Validate Transform") has
removed usage of the IPU3CameraData::rotationTransform_ but hasn't
removed the field itself, nor its initialization. Drop those as they're
unused.
Fixes: 1a614866a29c ("libcamera: camera_sensor: Validate Transform")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Fix a typo introduced in a comment when refactoring transformation
handling in the CameraSensor class.
Fixes: 1a614866a29c ("libcamera: camera_sensor: Validate Transform")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The CameraSensor::validateSensorDriver() function prints a Warning
message when the camera sensor doesn't support flips. We don't mandate
flip support and can run without it without any problem, so a warning is
too harsh. Demote it to a Debug message.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
libcamera uses double quotes "..." for #include directives for
internal headers.
While at it, move the request internal header include to the right
location.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The VC4 ISP uses a pipeline bit-depth of 13-bits. The AGC algorithm needs to
know this bit-depth when computing the Y value for the image.
Instead of hardcoding the VC4 bit-depth in the AGC source code, normalise all
region sums to 16-bits when filling the Statistics structure. AWB and ALSC are
agnostic about pipeline depth, so do not need changing.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Repurpose the StatisticsPtr type from being a shared_ptr<bcm2835_isp_stats> to
shared_ptr<RPiController::Statistics>. This removes any hardware specific header
files and structures from the algorithms source code.
Add a new function in the Raspberry Pi IPA to populate the generic statistics
structure from the values provided by the hardware in the bcm2835_isp_stats
structure.
Update the Lux, AWB, AGC, ALSC, Contrast, and Focus algorithms to use the
generic statistics structure appropriately in their calculations. Additionally,
remove references to any hardware specific headers and defines in these source
files.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Release the statistics buffer after running the through the AWB calculations.
Only the "counted" statistics are copied out to a local structure, so keeping
the statistics buffer allows the algorithm to see the "uncounted" statistics as
well.
This is currently handled by hard-coding the total number of statistics regions
regions based on the structure definition in the bcm2835_isp_stats structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a default constructor to the RPiController::Histogram class that creates
an empty histogram. Since this is a cumulative histogram, push a value of 0 into
the first (and only) bin to signify this.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
At present, the controller algorithms access the bcm2835_isp_stats structure,
which is hardware specific. It would be desirable to abstract out the statistics
structure to remove hardware specific headers from the algorithms source files.
Define a new templated RegionStats class that encompasses region based
statistics generated by the ISP. For the VC4 ISP, this can be used to hold
RGB sums and focus FoM values.
Define a new Statistics structure that holds all the VC4 ISP statistics output.
This includes AGC histograms, AGC/AWB region sums and focus FoM regions.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Bugfixes:
* libcamera: yaml_parser: Use C locale
* libcamera: base: utils: Support C libraries lacking locale support
* py: cam.py: Fix duplicate metadata output if more than one stream
* libcamera: camera: Fix validateColorSpaces to choose main colour space
* pipeline: raspberrypi: Fix handling of colour spaces
Core:
* test: Fix/Enable testing with ASan
* test: Remove redundant pipeline tests
* meson: Only build pipeline handlers needed in host architecture
* meson: Add 'all' choice to pipelines option
* utils: checkstyle.py: Add commit title checker
* libcamera: ipa_module: Relax ipaModuleInfo symbol size check
* pipeline: Support configuration file paths
ipa:
* camera_sensor: Improve h/v flip handling
* camera_sensor: Add AR0521 Sensor support
* camera_sensor: Add OV4689 Sensor support
* camera_sensor: Add support for OmniVision OV8858
* raspberrypi: Support Autofocus with PDAF
* raspberrypi: Support for the Sony IMX708 sensor
* rkisp1: Raise maximum analogue gain
pipeline:
* raspberrypi: Support parameters from a configuration file
* raspberrypi: Add a parameter to disable startup drop frames
* libcamera: rkisp1: Add support for Transform
apps:
* gstreamer: Add bayer8 support to libcamerasrc
* qcam: Show string representation of pixel format
ABI Compliance:
* abi-compliance-checker reports 100% ABI and API compatibility with
with v0.0.3
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new pipeline config parameter "disable_startup_frame_drops" to
disable any startup drop frames, overriding the IPA request.
When this parameter is set, it allows the pipeline handler to run with
no internally allocated Unicam buffers ("min_unicam_buffers").
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the ability to read the platform configuration parameters from a
config file provided by the user through the LIBCAMERA_RPI_CONFIG_FILE
environment variable. Use the PipelineHandler::configurationFile()
helper to determine the full path of the file.
Provide an example configuration file named example.yaml. Currently two
parameters are available through the json file:
"min_unicam_buffers" The minimum number of internal Unicam buffers to
allocate.
"min_total_unicam_buffers" The minimum number of internal + external
Unicam buffers that must be allocated.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Reorder the code such that the IPA requested startup drop frames count is
available before the pipeline handler allocates any stream buffers.
This will be used in a subsequent change to stop Unicam buffer allocations if
there are no startup drop frames required and the application has configured a
raw stream and always provides buffers for it.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a configuration structure to store platform specific parameters used by
the pipeline handler. Currently, these only store Unicam buffer counts,
replacing the hardcoded static values in the source code.
In subsequent commits, more parameters will be added to the configuration
structure, and parameters will be read in through a config file.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new helper function PipelineHandler::configurationFile() that returns
the full path of a named configuration file. This configuration file may be read
by pipeline handlers for platform specific configuration parameters on
initialisation.
The mechanism for searching for the configuration file is similar to the IPA
configuration file:
- In the source tree if libcamera is not installed
- Otherwise in standard system locations (etc and share directories).
When stored in the source tree, configuration files shall be located in a 'data'
subdirectory of their respective pipeline handler directory.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a pipeline_data_dir variable to the meson build files. This variable
points to the location of pipeline handler specific configuration files
on the filesystem.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We implement a custom validateColorSpaces method that forces all
(non-raw) streams to same colour space, whilst distinguishing RGB
streams from YUV ones, as the former must have the YCbCr encoding and
range over-written.
When we apply the colour space, we always send the full YUV version as
that gets converted correctly to what our hardware drivers expect. It
is also careful to check what comes back as the YCbCr information gets
overwritten again on the way back.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Add support for Raspberry Pi Camera 3 modules (Sony IMX708 camera sensor) to the
Raspberry Pi IPA. These modules are available in either normal or wide angle
lens, both with IR or no IR cut options, giving a total for 4 variants. Provide
IQ tuning files for all four variants.
The IMX708 camera helper additionally parses PDAF and HDR histogram data that
is provided in the embedded data stream from Unicam.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add CameraSensorProperties for the Sony IMX708 sensor.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the current frame's lens position (in dioptres) to the DeviceStatus
structure. This value is obtained from the AfAlgorithm::getLensPosition()
member function. Return this lens position back to the pipeline handler to
store in the metadata field of the request.
As a drive-by, fixup some inaccurate comments in the DeviceStatus structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst nick.hollinghurst@raspberrypi.com
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the first version of the Raspberry Pi autofocus algorithm. This
implementation uses a hybrid of contrast detect autofocus (CDAF) and phase
detect autofocus (PDAF) statistics. PDAF is always preferred over CDAF due to
having less "hunting" behavior.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Handle the results returned from the autofocus algorithm by updating lens
actuator position to the desired value. Update the Request metadata with the
algorithm status to provide back to the application.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add handlers for all autofocus related libcamera controls. Translate these
controls to the RPiController autofocus algorithm API.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add all the autofocus controls handled by the IPA into the ControlInfoMap if
a controllable lens actuator is present.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Reorder the libcamera/request header file inclusion to match the libcamera
guidelines.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
