| Age | Commit message (Collapse) | Author |
|---|
|
Implement rkisp1 queueRequest() function to update each algorithm with user
controls.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add queueRequest() function to the Algorithm class. The queueRequest() function
provides controls values coming from the application to each algorithm.
Each algorithm is responsible for retrieving the controls associated to them.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The logic used to match asynchronous image and embedded buffers was being overly
aggressive by possibly allowing an unmatched image buffer to be sent to the IPA
if the matching embedded buffer had not yet been dequeued. This condition only
occurs when the system is heavily loaded and dropping frames.
Fix this by holding image buffer in the queue during these conditions until the
next embedded buffer dequeue event.
Reported-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Tested-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
SimpleConverter::formats() should return an empty vector if the input
format is not supported by the converter.
Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Forward declarations of IPACameraSensorInfo and inclusion of
linux/rkisp1-config.h are not needed in headers that use them only for
arguments to functions defined by the Algorithm base class, as inclusion
of algorithm.h will bring the necessary declarations for function
arguments. Drop them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Now that ControlList::get() returns a std::optional<T> to handle missing
controls, the error log message in the call to ControlList::find() is
unnecessary and likely invalid.
Fix this by avoiding the call to ControlList::find() from
ControlList::get() and replacing with a call to the underlying
std::unordered_map::find().
Fixes: 1c4d48018505 ("libcamera: controls: Use std::optional to handle invalid control values")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ControlList::contains(const ControlId &id) function isn't used, as
it has been replaced by usage of the get() function. Document get as
being the preferred way to check for the presence of a control in a
ControlList, and drop the contains() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Now that the ControlList::get() function returns an std::optional<>, it
is the preferred way to test if a control is present in a ControlList.
Use it in the test to prepare for removal of ControlList::contains().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The ControlList::get(const Control<T> &ctrl) function has been modified
in commit 1c4d48018505 ("libcamera: controls: Use std::optional to
handle invalid control values") to return an std::optional<>, but its
documentation wasn't updated. Fix it.
Fixes: 1c4d48018505 ("libcamera: controls: Use std::optional to handle invalid control values")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The doxygen document blocks of various ControlList function qualify
functions with full template and return type specification. This isn't
needed, and the extra verbosity makes the documentation blocks more
difficult to read. Drop the template qualifiers and return types. The
generated documentation is not affected.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The doxygen '\todo' directory doesn't need to be followed by a colon,
yet a few strayed occurrences have made their way in. Fix them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Some hardware supported by the rkisp1 driver, such as the ISP in the
i.MX8MP, don't have a self path. Although at the moment the driver still
exposes the self path, prepare the rkisp1 pipeline handler for when the
self path will be removed for devices that don't support it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the std::vector::back() instead of [0] index which corresponds
to std::vector::push_back() for tracking of pads. This doesn't
introduce a functional change as the gst_libcamera_src_init() will
only add one pad but it helps with readability.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Provide a 10-bit bayer packing utility for the unpacked data produced
by ipu3-unpack.
Usage: ipu3-unpack input-file output-file
The output-file can be "-" to pack the data to stdout.
The output file generated by ipu3-pack can be directly fed to IMGU
for streaming.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that the ControlList::get() function returns an instance of
std::optional<>, we can replace the ControlList::contains() calls with a
nullopt check on the return value of get(). This avoids double lookups
of controls through the code base.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Previously, ControlList::get<T>() would use default constructed objects to
indicate that a ControlList does not have the requested Control. This has
several disadvantages: 1) It requires types to be default constructible,
2) it does not differentiate between a default constructed object and an
object that happens to have the same state as a default constructed object.
std::optional<T> additionally stores the information if the object is valid
or not, and therefore is more expressive than a default constructed object.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Support the X variants of the RGB pixel formats alongside the
equivalent Alpha component based versions.
The QImage::Format_RGB32 and QImage::Format_RGBX8888 formats only
specify that the alpha component must be 0xff. While the Qt
documentation doesn't guarantee that the alpha value will be ignored by
consumers, this seems to be the implemented behaviour, at least when
rendering with QPainter::drawImage().
The existing use of QImage::Format_RGBA8888 is updated to use the
QImage::Format_RGBX8888 variant to ensure that the image data is
visible.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Support the X variants of the RGB pixel formats
along side the equivalent Alpha component based versions.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Update the header orders to match the code style as decreed by
clang-format.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix the sort order of the Qt headers to match the expected
sort order from clang-format.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If the pixel format gets adjusted to the default NV12 format during
validation, it gets currently ignored and the user-supplied format is
used nonetheless.
Fix it by using the adjusted pixel format.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The SDL_PixelFormatEnum type has been introduced in libsdl by
1a4c0d4e17e6 ("Fixed bug 4377 - SDL_PIXELFORMAT enum is anonymous, which
prevents its use in a templated function") which is only available after
release 2.0.10 of the library.
Debian 10 ships libsdl at version 2.0.9 and building cam with sdl
support there fails with error:
./src/cam/sdl_texture.h:27:8: error: ‘SDL_PixelFormatEnum’ does not name
a type; did you mean ‘SDL_PixelFormat’?
Fix that by using the base type uint32_t in place of
SDL_PixelFormatEnum.
Reported-by: https://buildbot.libcamera.org/#/builders/6/builds/355
Fixes: 11554a259f4e ("cam: sdl_sink: Add SDL sink with initial YUYV support")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
|
|
The media graph may include a CSI-2 receiver entity between the sensor
and the ISP for platforms that have a CSI-2 receiver external to the
ISP. Support this by configuring the pipeline accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The regexp to convert the raw pixel media bus code to a pixel format is
incorrect. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
With sensors supporting crop, the regexp used to parse the media-ctl
output isn't correct as the pad configuration may span multiple lines
and contain other parameters. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Delete frames previously captured before starting a new capture, to
avoid mixing old and new frames.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The controls::ScalerCrop in the ControlInfoMap was advertised based on
the ISP output Rectangle. This is incorrect, it needs to be set based on
the sensor analogue crop Rectangle. Fix this.
Additionally, do not use emplace to be consistent with the other
controls set in the ControlInfoMap.
Fixes: 9dacde0d651d (pipeline: raspberrypi: Advertise ScalerCrop from the pipeline handler)
Reported-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The rkisp1 hardware supports both a CSI-2 input and a parallel input,
where the sensor is connected directly to the ISP. On RK3399, the CSI-2
receiver is internal, but on the i.MX8MP, the CSI-2 receiver is a
separate IP core, connected to the parallel input of the ISP, and gets
exposed to userspace as a V4L2 subdev. To prepare for this, handle an
optional CSI-2 receiver subdev in the pipeline.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Compiling backtrace.cpp for ARM32 produces the following error with the
clang-11 (and later) compiler:
--------------------
../src/libcamera/base/backtrace.cpp:195:12: error: use of SP or PC in the list is deprecated [-Werror,-Winline-asm]
int ret = unw_getcontext(&uc);
^
/usr/include/arm-linux-gnueabihf/libunwind-common.h:114:29: note: expanded from macro 'unw_getcontext'
^
/usr/include/arm-linux-gnueabihf/libunwind-arm.h:270:5: note: expanded from macro 'unw_tdep_getcontext'
"stmia %[base], {r0-r15}" \
^
<inline asm>:1:2: note: instantiated into assembly here
stmia r0, {r0-r15}
--------------------
Suppress this compilation error with a clang-specific pragma around the
offending statements.
Further information about this error can be found at
https://github.com/dotnet/runtime/issues/38652
Bug: https://bugs.libcamera.org/show_bug.cgi?id=136
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@rasbperrypi.com>
Tested-by: Naushir Patuck <naush@rasbperrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It's not safe to assume `-include config.h` works, since this depends on
the functionality of the compiler that the cwd when running the compiler
is searched first.
When libcamera is included as a Meson subproject, the cwd of the
compiler is the cwd of the main project, not of libcamera's build dir,
and thus cannot be found. Instead, pass the include filename as a path
based on the current build dir.
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The load_image function would throw errors with JPEG or JPG files containing
no raw data.
Prevent throwing these errors by returning 0 if an error has occurred.
Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit 6f539a6d2fa9 ("delayed_controls: Remove reduandant firstSequence_")
removed support for frame number start offset from the DelayedControls
class, as it is now guaranteed that the first sequence number as it comes
from the V4L2VideoDevice will always be 0.
However the delayed_controls.cpp unit still has two tests that passes
a non-zero first sequence number to the DelayedControl class, causing
the test to spin forever and consequentially fail.
Remove the two tests from the unit to fix this.
The first removed test was testing the class against frame start
sequence numbers greater than zero and can safely be removed.
The second test was instead validating the class against sequence number
overflow, which is now not possible to test anymore as the DelayedControls
class now assumes 0 as first frame sequence number.
Fixes: 6f539a6d2fa9 ("delayed_controls: Remove reduandant firstSequence_")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We now have V4L2VideoDevice ensuring that sensor sequence numbers
start from zero [1], and we desire that these should match the Request
sequence number as well.
[1] 1c9dc0fd89cf ("libcamera: v4l2_videodevice: Identify non-zero stream starts")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The DelayedControls implementation tracked the sequence numbers to
determine the offset if a device did not commence with a sequence number
of 0.
This guarantee is now handled by the V4L2VideoDevice.
Remove the firstSequence_ offset and the corresponding running_ flag
which was used to track setting firstSequence_ from the DelayedControls.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The task run function races with two other threads that want to resume
the task: the requestCompleted() handler and the buffer-notify signal
handler. If the former queues completed requests or the latter queues
back buffers to the pool, and then resume the task, after the task run
handler checks the queues but before it attemps to pause the task, then
the task may be paused without noticing that more work is available.
The most immediate way to fix this is to take the stream_lock in the
requestCompleted() and buffer-notify signal handlers, or cover the whole
task run handler with the GstLibcameraSrcState lock. This could cause
long delays in the requestCompleted() handler, so that's not a good
option.
Instead, pause the task unconditionally at the beginning of its run
function, and track while processing buffers and requests if the task
needs to be resumed. It may also get resumed externally by the
buffer-notify signal handler or the request completion handler, which
are guaranteed not to race due to the lock taken by the gst_task_pause()
and gst_task_resume() functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
|
|
Simplify the task run function futher by moving the processing of
completed requests to a separate function. No functional change
intended, only increased readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
In order to prepare for creation and queuing of multiple requests, move
the request creation and queueing code to a separate function. No
functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The srcpads_ vector is protected by two different locks, the GstObject
lock of the libcamerasrc element, and the stream_lock that covers the
run function of the thread. This isn't correct. Use the stream_lock
consistently to protect the pads.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Add a new lock to the GstLibcameraSrcState class to protect the queued
and completed requests queues. This replaces the GstObject lock, and
minimizes the lock contention between the request completion handler and
the task run handler as the former must run as fast as possible.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
This simplifies the code, and allows removing the internal queue in the
GstLibcameraPad object.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Move the request wrap to a completed queue in the request completion
handler to move more of the request completion processing to the
libcamerasrc task. This lowers the amount of time spent in the
completion handler, and prepares for reworking the usage of locks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
To prepare for the addition of a completed requests queue, rename the
existing queued requests queue from requests_ to queuedRequests_.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The buffer pts and the pad latency are computed from the framebuffer
timestamp, separately for each pad. Use the sensor timestamp provided
through the request metadata instead, to compute the values once outside
of the pads loop.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
For symmetry with RequestWrap::removeBuffer(), pass the Stream pointer
to addBuffer(). This handles streams at the GstPad level instead of the
GstBuffer level, which allows making the GstLibcameraPool API a bit
cleaner by removing the gst_libcamera_buffer_get_stream() helper
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The GstBuffer variable in GstLibcameraSrcState::requestCompleted() is
only used within the loop scope. Make it a local loop variable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The gst_libcamera_resume_task() helper is an implementation of the
gst_task_resume() function that predates its addition to GStreamer. Use
gst_task_resume() when available, and rename gst_libcamera_resume_task()
to gst_task_resume() to support older GStreamer versions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
|
|
To allow associating pointers with FrameBuffer instances, turn the
cookie into a 64-bit integer. This matches the Request cookie with is
also a uint64_t.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Get the Black Level Correction algorithm parameters from YAML tuning
data.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the OV5640 tuning file containing default values for 'black level
correction' algorithm.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
