| Age | Commit message (Collapse) | Author |
|---|
|
Before using any algorithm, we want the IPAContext to be ready for
those. Introduce the IPAContext following the existing design from
IPA::IPU3. Each algorithm will then introduce the needed fields.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When the AGC will run, it will use analogue gains as double values. We
will need those values to be converted to apply the control. Introduce
CameraSensorHelper and call it at init().
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The driver is responsible for setting the proper limits for its
controls.
The IMX219 has an analogue gain of 1.0 when the gain code is set to 0,
therefore we can not clamp to a minimum gain code of 1.
Rework this for both IPU3 and RkISP1, for both Exposure and Gain
controls.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the IPA is initialized, it will need to know the sensor model
used in order to properly call CameraSensorHelper for the analogue gain.
Modify the init definition in the pipeline handler and in the IPA as
well as the mojo interface to pass the IPASettings.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The equation is badly reported in the CameraSensorHelper, as m1 and c0
are inverted. Correct it to have a proper gain calculation.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The meson option summary currently does not report if the support
for tracing is enabled or not. Add it.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The error message should be:
"Failed to associate buffer with request"
Fix that.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When acquiring the media device, it is not necessary to match all entity names,
so remove it. Aditionally, we do not need to keep the MediaEntity pointers for
the Unicam and ISP devices stored within the PipelineHandlerRPi class. Instead
these can be stored locally in PipelineHandlerRPi::match().
PipelineHandlerRPi::registerCamera() now returns an int error code instead of a
boolean for pass/fail.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Split out PipelineHandlerRPi::match() so that media device enumeration and
acquisition is separated from camera registration. The former logic remains
in PipelineHandlerRPi::match(), whereas the latter logic is moved into a new
PipelineHandlerRPi::registerCamera() member function.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Update the urls in the README file for building/running libcamera on the
Raspberry Pi platforms.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Template argument deduction results in the lvalue and lvalue reference
arguments to the invokeMethod() function causing deduction of the Args
template type to a non-reference type. This results in the argument
being passed by value and copied.
Fix this by using a cv-unqualified rvalue reference parameter type. The
type is then deduced to an lvalue reference when the argument is an
lvalue or lvalue reference, due to a combination of the special template
argument deduction rule for rvalue reference parameter types:
If P is an rvalue reference to a cv-unqualified template parameter
(so-called forwarding reference), and the corresponding function call
argument is an lvalue, the type lvalue reference to A is used in place
of A for deduction.
(https://en.cppreference.com/w/cpp/language/template_argument_deduction)
and the reference collapsing rule
(https://en.cppreference.com/w/cpp/language/reference#Reference_collapsing).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Tracepoints.h.in is not modified to use the pragma as it requires
self-inclusion.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
The shutter speed limits and analogue gains limits are in the agc
structure in IPASessionConfiguration. They are badly mentioned as being
part of the grid structure, fix it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
PixelFormatInfo::info() would log a warning message if the PixelFormat was
invalid when called from the isRaw() function. Add a validity test in isRaw()
to avoid this warning message.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If a stream is marked as external, double the number of V4L2BufferCache slots
that are allocated. This is to account for additional buffers that may be
allocated directly by the application.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
For simplicity, the pipeline handler currently look at the maximum number of
buffers set in the StreamConfiguration by the user and allocate the same number
of internal buffers for all device nodes. This would likely overallocate buffers
for some nodes. Rework this logic to try and minimise overallcations without
compromising performance.
The key change is to mostly decouple the number of internal buffers allocated
from number of buffers requested by the user through the StreamConfiguration.
For ISP nodes, we only ever need 1 set of internal buffers, as the hardware runs
synchronous with the requests and IPA.
For Unicam nodes, allocate a minimum for 4 buffers (exported + internal), but
also require at least 2 internal buffers to minimise frame drops.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This function does not modify the pixFmt parameter, so use a const qualifier.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The relative luminance is calculated using an iterative process to
account for saturation in the sensor, as multiplying pixels by a gain
doesn't increase the relative luminance by the same factor if some
regions are saturated. Relative luminance estimation doesn't apply a
saturation, which produces a value that doesn't match what the sensor
will output, and defeats the point of the iterative process. Fix it.
Fixes: f8f07f9468c6 ("ipa: ipu3: agc: Improve gain calculation")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The inter-quantile mean is a value that is computed as part of the AGC
run. It doesn't need to be stored in a member variable. Return it from
measureBrightness(), which makes the flow of data easier to follow.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The "current" prefix in the currentYGain variable name is confusing:
- In Agc::estimateLuminance(), the variable contains the gain to be
applied to the image, which is neither a "current" gain nor a "Y"
gain. Rename it to "gain".
- In Agc::computeExposure(), the variable contains the gain computed by
the relative luminance method, so rename it to "yGain".
While at it, rename variables to match the libcamera coding style.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The AGC computes the average relative luminance of the frame and calls
the value "normalized luma", "brightness" or "initialY". The latter is
the most accurate term, as the relative luminance is abbreviated Y, but
the "initial" prefix isn't accurate.
Standardize the vocabulary on "relative luminance" in code and comments,
abbreviating it to Y when needed.
While at it, rename variables to match the libcamera coding style.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The kMaxLuminance constant is badly named, it's not a maximum luminance,
but the maximum integer value output by the AWB statistics engine for
per-channel averages. The constant is used in a single place, hardcoding
the value is actually more readable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
checkstyle.py is ignored too often. Document how to automate its usage
through git commit hooks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Until commit f8f07f9468c6 (ipa: ipu3: agc: Improve gain calculation)
the gain to apply on the exposure value was only using the histogram.
Now that the global brightness of the frame is estimated too, we don't
need to remove part of the saturated pixels from the equation anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libgtest-dev is provided as a static library at least by Debian 10.
The compiler and linker to create the static library might be
different from ones used for libcamera. This causes a problem
upon linking.
This puts gtest code to subprojects, builds the code and link it
for lc-compliance. However, libgtest is locally built as a library on
ChromeOS and thus the used compiler and linker are the same as one
used for libcamera. We don't do these on ChromeOS build environment.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We can report the controls::AnalogueGain metadata now that AGC is
updating it correctly.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that we have the exposure time calculated, report it in the
controls::ExposureTime and don't use the pipeline handler for it
anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
We use the line duration several times in the IPAIPU3. Instead of
recalculating it each time, cache the value as a utils::Duration.
ExposureTime and FrameDuration units are in micro-seconds, cast the
Duration accordingly.
As sensorInfo is no longer used in updateSessionConfiguration remove the
reference to it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that the color temperature is updated per-frame, use the value and
set the corresponding controls::ColourTemperature.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The AWB estimates the color temperature, but it is not used at all. It
can be useful for debug purpose at least, but also for lux estimation
later, to be able to know the temperature estimated for a given frame.
Add a new member to the IPAFrameContext::awb for this purpose, and
update the value in AWB.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The minimum and maximum exposure are stored in lines. Replace it by
values in time to simplify the calculations.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Previously, the exposure value was calculated based on the estimated
shutter time and gain applied. Now that we have the real values for the
current frame, use those before estimating the next one and rename the
variable accordingly.
As the exposure value is updated in the beginning of the computation,
there is no need to initialize effectiveExposureValue anymore in the
configure call, and it can be a local variable and not a class variable
anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When an image is partially saturated, its brightness is not increasing
linearly when the shutter time or gain increases. It is a big issue with
a backlight as the algorithm is fading to darkness right now.
Introduce a function to estimate the brightness of the frame, based on
the current exposure/gain and loop on it several times to estimate it
again and approach the non linear function.
Inspired-by: 7de5506c30b3 ("libcamera: src: ipa: raspberrypi: agc: Improve gain update calculation for partly saturated images")
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
When we compute the new gain, we use the iqMean_ and estimate an
exposure value gain to apply. Return early when the gain is less than
1%.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that we have the real exposure applied at each frame, remove the
early return based on a frame counter and compute the gain for each
frame.
Introduce a number of startup frames during which the filter speed is
1.0, meaning we apply instantly the exposure value calculated and not a
slower filtered one. This is used to have a faster convergence, and
those frames may be dropped in a future development to hide the
convergance process from the viewer.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When the histogram is calculated, we check if a cell is saturated or not
before cumulating its green value. This is wrong, and it can lead to an
empty histogram in case of a fully saturated frame.
Use a constant to limit the amount of pixels within a cell before
considering it saturated. If at the end of the loop we still have an
empty histogram, then make it a fully saturated one.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=84
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
